Get matched with top stucco pros in Anmoore, WV

To repair damaged exterior stucco, you’ll first remove all loose and crumbling material from the damaged area. You then need to thoroughly clean the area and dampen it to ensure proper bonding. After that, you’ll apply a bonding agent to the repair area, then apply new stucco in layers, allowing for curing time between each layer. The final coat should be textured to match the surrounding stucco pattern as closely as possible. Once fully cured, the repaired area can be painted to match the rest of the wall if needed.

The best way to assess that your stucco needs repair is to inspect it, both visually and physically. If you notice cracks, chips, or staining, that’s a good indication that your stucco could use some TLC by a professional. Additionally, if you touch an area that feels soft and has a little “give,” you should consider repairing it as soon as possible to avoid further damage, both to additional stucco spots and to your home’s structure. 

Solid, unpainted stucco shouldn’t suffer damage from dots of glue used for this task. If the stucco is dirty, you may notice slight marks when you heat and peel the glue away, but these aren’t permanent.

However, not all stucco walls are solid stucco. Some are “faux” stucco with a foam backing. This kind of stucco veneer is more susceptible to damage, including damage from hot glue. We don’t suggest attaching anything to these kinds of stucco walls, so make sure you check the stucco type before starting this project.

Yes, using natural additives and methods that lower impact.