Get matched with top fencing pros in Phelps, WI

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

You have several options for anchoring a temporary fence to keep it from falling down. Sandbags can be used as a standard weight, but they may blow away or fail in strong winds and inclement weather. Spikes and bolts are a cost-effective and easy-to-install alternative, but drilling can be difficult if the ground is frozen, too soft, or too hard. Another option is wind braces, which should be bolted into the ground to withstand turbulent wind; however, like spikes, they can be challenging to install in very soft or hard ground.

The most common hog wire gauge for a fence is 12.5. However, you can choose from a few gauges based on your needs. While 12.5 is a reliable gauge for penning in large, strong animals, 9 gauge is a better option of you have large animals that are easily spooked, such as horses. For smaller animals, like dogs or pigs, you can use a 16 gauge hog wire.

In most states, it is a legal requirement to have a fence around your pool to protect both swimmers and pool owners. These laws can vary by state, city, and county, so you must research the specific regulations in your area before installation. The rules may also differ for inground versus above-ground pools, with inground pools typically requiring a full fence. Additionally, most homeowners' insurance providers will require a fence around a residential pool before providing coverage. As a general rule, it's always best to have a fence for everyone's safety.