Get matched with top ceramic tile pros in Toledo, WA

The average cost for tile installation is about $2,000, with a typical price range between $500 and $6,500. On a per-square-foot basis, you can expect to pay between $5 and $45 for installation.

Several factors influence the total cost, including:

• Installation Site: Costs vary for different areas. Common project costs are: kitchen floor ($870–$6,100), countertop or backsplash ($500–$3,000), bathroom floor ($300–$2,400), or shower wall ($225–$2,000).

• Tile Type and Quality: The material significantly impacts price. For example, standard ceramic or travertine tile can cost about $1 per square foot, while luxury options like marble can be as much as $350 per square foot for the material alone.

• Project Size and Complexity: The total square footage, the complexity of the pattern, and the shape of the tile (e.g., square, rectangle, hexagon, mosaic) will affect labor and material costs.

• Site Preparation: The amount of prep work needed, such as removing old tile or installing a new subfloor or backer board, can add to the final price.

• Tile Characteristics: The tile's durability rating and porosity can also influence the price.

• Location: Labor rates vary by geographic location.

You can lay tile directly on a plywood countertop, but if it’s a high-traffic surface in a kitchen, it’s better to add a moisture-resistant base. Plywood is susceptible to moisture, so if dampness seeps through from the surface around the sink or where you prep food, it can cause the plywood to warp, leading to grout damage, cracked tiles, or mold growth under the surface. 

When cleaning porcelain tiles, avoid products that contain ammonia, bleach, and other harsh chemicals. Acid-based cleansers can damage the tile, though you can clean them with a diluted mixture of one-quarter cup white vinegar mixed with one gallon of hot water. It is important always to use a soft-bristled brush or sponge, since hard bristles and steel wool can scratch the tile.

For professional labor and materials, it would cost between $6,000 and $28,000 to install 1,000 square feet of Saltillo tile flooring. If that’s out of your budget, you could consider laying the tiles yourself or choosing a less expensive type of flooring. For example, vinyl flooring costs just $2 to $7 per square foot, so for a 1,000-square-foot space, you’d pay $2,000 to $7,000.