Top-rated gas log pros.

Get matched with top gas log pros in Wilder, VT

Enter your zip and get matched with up to 5 pros

Need a pro for your gas log service project in Wilder, VT?

Select your specific project to find the pro for you.

Find Gas log pros in Wilder

No results for Gas log pro in

Try adjusting your search criteria.
Gas Logs questions, answered by experts

The easiest way to empty a propane tank is to simply use it until no propane remains. If you’re short on time and need a faster solution, transfer the propane to another tank instead. Wear leather gloves to protect your hands, then connect the hoses from both propane tanks and seal them tightly. Turn the knob to open the supply tank valve on the full tank and let it run until the pressure pushes all the propane into the other tank. When all propane is transferred, remove the hose and seal each tank. 

The cost to repair a gas leak is $120 to $250 on average, but it could be as costly as $5,000, depending on the leak location and severity. 

For example, if you have drywall covering the source of the leak, you'll need to hire a contractor to replace the removed drywall. In addition, if the leak is underground, you'll need a contractor to excavate the ground to reach the gas line. 

Yes. There are a variety of standard pipe sizes used in plumbing. The main supply line connecting your home to the street is either 3/4 or 1 inch in diameter. Supply lines are 3/4 inch in diameter. Individual components are 1/2 inch in diameter. Meanwhile, your main drainpipe is often 4 inches wide. Most shower and bathtub drains are 2 inches in diameter, most toilet drains are 3 inches in diameter, and most sink drainpipes are 1 1/4 or 1 ½ inches in diameter.

The right way to vent a gas water heater is to have a pipe directly upward or slopes upward out of the house. Because hot air naturally rises, this type of venting will efficiently ensure that all gas moves out of the house. Your system may rely on fans or blowers as well.

Even though their jobs sound similar—both professions work on pipes—a plumber and pipefitter actually have very different jobs, and pipefitting isn’t considered plumbing. Pipefitting is done in commercial and industrial buildings and factories, and the pipes carry gas, chemicals, acid, and other potentially hazardous substances. Pipefitters often work in intense conditions while plumbers may work in lower-pressure environments.

The homeowners guide to home care is here

From average costs to expert advice, get all the answers you need to get your job done.

See all articles