Get matched with top sink installation pros in Valley View, TX

"I was expecting and prepared to have to tunnel or break concrete, but Morgan Leak Detection came in, located the leak and was able to bypass the bad line and reroute it with only a few simple to patch holes in the drywall. They were able to get a repair I expected to cost $7000 down to $2000. They are definitely not the cheapest guys in town if compared task for task, but they close the gap in service, honesty, and efficiency. I wanted a specialist for my problem and I was willing to pay to get the best. They delivered and I believe saved me a great deal of money in the long run. I had a friend with a similar problem a few weeks ago who got a huge quote from another plumber. I told her to give Morgan a call. Again, they found the leak and were able to perform a reroute that saved her money over the tunneling proposed by the other guy and Morgan was able to get to the job sooner to boot. This is definitely one of those cases of you getting what you pay for. They are a highly skilled company, do quality work, and won't try to jerk you around for more costly or complicated solutions. If you want it fixed right the first time, give them a call."

"Youngs called 20 minutes before the scheduled appointment to let me know the technician was on his way. He arrived on time, was courteous and unclogged the kitchen drain line within minutes. This company is contacted with my home warranty service so I cannot comment on their actual price for service, but well worth my $75 fee.
"

"Installation was great. The service guys were excellent. The salesperson left out a few important details such as the discounts we were able to eventually get and the communication between the service guys and the salesperson was lacking."

"Checked the entire house and water heater.? We discussed the water in depth, it would need to be replaced in the next year and it was 10 years old, at the end of it's life.? Adjusted all toilets and installed two new flappers, so the toilets don't run constantly and saves water.? Checked the shower and replaced the shower head.? We were entirely satisfied with the service."

"Very pleased with this first-time experience with Mark Masters General Contractors. The plumber, Seth Funkhouser, was prompt, courteous, listened patiently, discussed the possible problems, and explained the solution step-by-step. The sink/disposal and dishwasher are all performing perfectly. High confidence in this vendor. Now planning to consult with them about additional remodeling projects."

Eagle Total Services is a quality remodeling contractor serving the Mansfield, Austin, and Canyon Texas areas. We are family owned & operated, with 32 years of experience in all facets of interior and exterior renovation. We are a fully licensed, insured and bonded company. Eagle Total Services provides expert craftsmanship with a 10 year warranty on all work and your satisfaction guaranteed.\n\n

"Stonemasters of DFW were hired for the installation of granite counter tops in the kitchen and two bathrooms. This job included removal of old counters, under mount sink, and included all plumbing and electrical work. They even reinstalled new faucets in the bathroom.  The whole job took couple weeks but it was done very well and we are happy with the results. Derek provided advice on how we could save existing black splash tiles.  He also went an extra mile and replaced a faulty faucet multiple times until it was done right. We would definitely recommend Stonemasters of DFW for any type of remodeling work involving the kitchen and bathroom.
"

"Storm responded promptly to my email and was able to come by the same morning. He determined that the turbines were damaged and would need to be replaced. We already had some of the roof shingles. Storm went to Home Depot and purchased the replacement turbines and installed them and replaced the necessary shingles. He inspected the roof and added some needed silicone caulk. Storm detected the smell of methane from one of the turbines and asked to take a look in the attic. He showed me where one of the bathroom vent pipes was clearly damaged and we agreed that he would return the next day to repair the pipe.
"

"I had a different company out to diagnose a problem with the
rain sensor on my irrigation system.
That company?s technician found the sensor bypass switch on
the control panel on.
He told me that was the reason the sensor was not working
and apparently stopped his diagnosis there.
That next weekend I found that the sensor was indeed not
working and that was probably the reason the bypass switch was on.
I decided to try to replace the sensor myself and bought a
new sensor at Home Depot. (The Home Depot sensor was only $40.00 and the other
company was going to charge well over $200.00 to replace it.)
While I was attempting to install the new sensor I
accidentally touched the power terminals with the sensor wires, which caused a
spark.
The control panel went blank.
I initially had thought that the problem might have been a
circuit breaker or GFCI.
After checking the breaker box and all the GFCIs I could
find I was pretty sure it was the transformer in the control panel. (The
voltage in the panel is 24 volts and since it was wired directly into the 110
volt breaker box I knew there must be some sort of transformer in the control
panel.)
The control panel is mounted outside and is wired directly
into the circuit breaker box. I knew I had no business attempting to replace
the control panel.
I called H20 Sprinkler Systems on Monday.
They told me they could be out on Wednesday morning or
possibly Tuesday afternoon.
I told them we had family coming Tuesday afternoon so
Wednesday morning would actually be better.
The technician arrived a few minutes before his scheduled
arrival time of 8:00 AM.
He quickly told me that the controller had been ?fried? (my
term.)
He was able to install a new controller.
As he was about to connect the rain sensor (which I had just
bought at Home Depot) he warned me that those models are sometimes problematic.
Since I thought I would be able to return the sensor to Home
Depot, I had him go ahead and install a better sensor.
His sensor was $189.00 so it was quite a bit more than the
Home Depot model, but almost $100.00 less than the model offered by the other
company.
To be honest, I always wonder when someone suggests an
upgrade if they are totally honest or just pushing for more sales.
The installation took less than an hour and the total bill
was $478.00 ($200.00 for controller, $179.00 for sensor, and $89.00 for one
hour of labor and service call.)
"

Fully bathroom remodeling with thirty years of experience. Licensed master plumber. Not a franchise so you do not pay franchise fees. 12 employees. No subs. Additional phones (888) 981-2284 . Additional email - [email protected].