Get matched with top carpet cleaners in Jarrell, TX

The best solution for mopping floors depends on the type of floor you have, but a good all-around or multi-purpose DIY floor cleaner is 2 cups of warm water, 5 to 10 drops of liquid dish soap, and 1 tablespoon of lemon juice. This is safe to use on tile, laminate, wood, polished concrete, vinyl, and more, as it’s relatively neutral and lacks caustic and abrasive chemicals that could be harmful to children and pets. You can also use a multi-purpose commercial cleaner, but make sure to follow the directions for safety.

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

Our guide can also work for old tomato stains. If you’re trying to get rid of a lingering spot from spaghetti dinners past, you can skip step one and jump directly to step two. 

Pro tip: Allow soaking time for older stains. We recommend waiting at least 10 minutes between applying your cleaning solution and blotting it up.

Furniture cleaning is a relatively inexpensive home project, but it’s helpful to find ways to keep these services within your budget. Some ways to save on furniture cleaning include:

• Cleaning multiple pieces of furniture at once to save on trip fees and cleaning minimums

• Using slipcovers on furniture when possible to avoid stains and dirt

• Blot, never rub stains, to try to lift the mess out without spreading it deeper into the fibers

• Choose easy-to-clean furniture materials