Top-rated drywall insulation pros.

Best drywall insulation pros near Dale, TX

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Dale, TX?

Select your specific project to find the pro for you.

TRUSTED BY DALE, TX HOMEOWNERS

  • Average homeowner rating star icon4.6
    Average homeowner rating
  • Verified reviews icon65
    Verified drywall insulation services reviews

Top-Rated Drywall insulation pros in Dale - Updated Nov 2026

Avatar for Insulation Services
Insulation Services
5.0(
9
)
Blown-In Insulation - Install or UpgradeInsulation - Install or Upgrade

Serving Dale, TX and surrounding areas

Approved

In business since 1991

Free estimates

Customers say: True professional

"Mr Lenard arrived at my block and beam farm house spent as long as necessary talking through options and prices points for old under house insulation removal and replacement with spray foam. He also walked through actions I should take to reduce moisture collection underneath the house. Leonard was patient with my schedule while I actioned the recommendations, and finally, spray foam work conducted was above expectations. Thank you Leonard and the Insulation Services team, when it’s time to insulate the barn, I’ll be calling again."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Response time3 days
Response rate100%
9 neighbors recently requested a quote
Avatar for Koala Insulation of Texas Hill Country
Koala Insulation of Texas Hill Country
5.0(
7
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Dale, TX and surrounding areas

Approved

In business since 2022

Free estimates

Emergency services offered

"Bottom line: I would hire this company again. Koala Insulation came and inspected my attic spaces with a infrared scanning tool. They looked at the level of insulation and found areas where the heat was penetrating more. They recommended specific actions and gave me a number of quoted options on the spot. I was then able to book the service within days of the initial visit. The technicians came and performed the service professionally and made sure to involve me where needed. I would hire them again."
Blown Insulation After
Blown Insulation Before
Blown Insualtion After
Blown Insulation Before
Shipping Container - Closed Cell Spray Foam

+4

Response time7 hrs
Response rate100%
22 neighbors recently requested a quote
Be My Guest
5.0(
1
)
Injection Insulation - Install

Serving Dale, TX and surrounding areas

Approved

In business since 2014

Free estimates

Credit card accepted

"I hired Be My Guest to do a yard clean-up for my house before it went on the market. I had contacted previous companies for estimates and received ridiculous quotes of $1100-1600 to clean my front and back yard which included trimming bushes and tree limbs, raking leaves and spreading mulch that I purchased. Fernando, the owner of Be My Guest, quoted me $300. Deal! As I shared my to-do list of projects to prepare my house to list, I found out that the companies abilities extended past yard work. I ended up hiring them for $1100 to clean the yard, paint the house and front door, replace the expansion boards in the driveway and walkway with cement, fix the cracks along the cement foundation from the house settling and paint the back porch, stain the cement floor/steps, paint the garage and stain the floor. I also ended up getting full sod for the back yard, which cost met $850 total including labor. Other companies were quoting me $1100-1300 for a back yard that is part of a .11 acre total property! The projects soon moved inside and I hired them the paint the baseboards and trim, paint one room, replace the flooring in the kitchen and bathrooms, fix laminate pieces in the current flooring and fix moulding at the top of my kitchen and bathroom closets. The work took over a week to complete and time for completion was underestimated a couple of times, but I was extremely pleased with the work overall. My house is now move-in ready and the realtors who visited said it looked like a model home. Exactly what I wanted! I have a list of projects to begin at the new house and have already scheduled Fernando to start next week, including yard work and new fencing that will be over 400 feet. I often get mistaken as a naive female who doesn't do her research on projects and costs and some contractors/owners I've contacted in the past to get estimates see dollar signs when I answer the door. Fernando didn't treat me that way and it put him above the others. I highly recommend Be My Guest and Fernando and his team. He was fair, open to changes or add-ons to your list without gouging you price wise and they do great work."
Response time2 days
Avatar for Payless Insulation
Payless Insulation
4.8(
41
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Dale, TX and surrounding areas

In business since 1979

Free estimates

Emergency services offered

"I had a pretty good experience with this company from start to finish.  They were actually recommended by another insulation company who did not have all the materials to do what proved to be a rather complicated insulation job. 
Our recently purchased 1950's house has a converted attic with knee-walls upstairs (provides no backing to support most insulation systems).  Some walls were partially open due to a complete new re-wire.  (I left wire-runs exposed to avoid possible drilling into cables.)  Payless insulation was able to devise an insulation system that would work within these constraints.  Payless thoroughly vacuumed out old insulation (matted and dirty from rodents which had, at some point in history, taken up residence in the crawl spaces) prior to blowing in the new Cel-bar.  The improvement to the house temperature was quite noticeable the following day.  (Upstairs results were less noticeable, but that is likely in part due to old single-pane windows which we have not yet replaced.)
I realize I will probably find I need better ventilation in attic spaces as well as new windows to appreciate the full effect of insulation.
 Towards the end of the job, I did get the impression that the crew was rushing to finish up so as not to have to return a second day (as initially scheduled).  There were a couple of very minor oversights -- negligible for the size of the job.  But when I discovered a real concern a couple days after the job (attic insulation was blown up and covering the only attic ventilation -- two small gable vents -- in a very tight, and no longer accessible space) a member of the crew returned to address it (which needed to be done from outside on a very tall ladder!)  He spent a fair amount of time insuring that all was right.  I am happy with the final results.
Everyone working with Payless Insulation was professional, gracious, caring, and took the time to ensure that I was 100% satisfied with the final outcome.   This was a complicated installation, and they did a good job.

UPDATE:
I am lowering the grade to a "B" based on some subsequent observations.  I had expressed concern that there was no blocking between floor joists where they ran into the uninsulated crawl-space.  I was concerned that settling of blown-in insulation in the un-conditioned crawl space might permit unconditioned air to flow between floors of house.  While Payless insisted there would be no settling, this has in fact occurred (either that or nowhere near enough insulation was initially installed).  Furthermore, a representative from my A.C. company recently explained that the install was regardless inadequate without some form of vapor barrier -- the insulation is only like a "cigarette filter" without a barrier -- and that convection currents would regardless cause air exchange between the insulated and non-insulated spaces.   I am a little disappointed to find that my expensive insulation is not functioning as it could/should."
Response time1 day
Response rate100%
Recommended by94%of homeowners
Avatar for ENERGY ATTIC USA
ENERGY ATTIC USA
4.9(
31
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Dale, TX and surrounding areas

In business since 2006

Free estimates

Credit card accepted

"I live in a old house, and the insulation on the attic needs to be added.  City of Austin Utilities (Austin Energy) has a great rebate program for insulation, so I signed up.  EnergyAttic is one of the companies listed by Austin Energy.  For getting the quote, the audit person was friendly and through with his explanation about what's and why's.  Finally I scheduled for the work.  Kent came with his crews and basically supervised and worked on the problem and the insulation.  He made sure everything was installed (seal, insulation) properly and Austin Energy auditor approved the work.  The door blower/blast test took a while because of setting issue (EnergyAttic subcontracted to other company), and finally after 3 hours, we did get an excellent result.  I was happy with Kent's and his crews work.  They were friendly, punctual, and got the work done.  They actually came back to reseal door on the furnace area.  They also promised to come back if  I were to work on the attic and the insulation needed to be re-sweep."
Radiant Barrier
Insulation
Solar Attic Fans
Recommended by100%of homeowners
Avatar for Polar Boyz Insulation LLC
Polar Boyz Insulation LLC
4.5(
45
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Dale, TX and surrounding areas

In business since 2014

Free estimates

Emergency services offered

"Wanted to treat a large attic space in a newly built home. Space was unconditioned. Joel from Polar Boyz gave me an education and we talked over what I needed. He was very helpful. They were able to remove the blown insulation on the floor, install plywood flooring, and then seal the space with spray foam. Joel made sure the job was done well for a reasonable price. I love my new insulated storage room! Thank you Polar Boyz."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+7

Recommended by90%of homeowners
Avatar for Foam Solutions
Foam Solutions
4.6(
12
)
Injection Insulation - Install

Serving Dale, TX and surrounding areas

In business since 2017

Free estimates

Offers commercial services

"Foam Nerds was very responsive and professional! They got the job done in the time that they estimated and we immediately felt a difference in our home's insulation! Felt cooler in the summer and warmer in the cooler months. 100% would recommend Foam Nerds to anyone thinking about getting insulation!"
attic ceiling spray foam
Metal building spray foam
wellhouse
Spray Foam Rig
Gym/Metal Building

+3

Response time1 day
Response rate92%
Recommended by90%of homeowners
Avatar for Speed Dry USA Cleaning and Restoration
Speed Dry USA Cleaning and Restoration
4.0(
100
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Dale, TX and surrounding areas

In business since 2009

Emergency services offered

Credit card accepted

"Highly professional every step of the way, from the first contact to the last inspection of completed work. Speed-Dry president, representatives and office personnel provided excellent communication. They were available to answer questions, even outside of normal business hours. The dry-out process was completed promptly. The workers who came to our home were respectful and skilled in repair, drywall replacement, finishing and painting. It was obvious they took pride in their work. They were very careful to protect or move furniture, draperies, wall hangings, ceiling fans, cabinets and appliances (including the refrigerator) so these would not get construction dust or paint on them. They matched our paint color perfectly. They cleaned up after their work. We were surprised at how quickly the work was completed and are very satisfied with the whole experience. Representatives including estimator also understood exactly what was required by our insurance company and because of their thoroughness our claim was processed smoothly.
"
Recommended by62%of homeowners
...
Showing 1-10 of 64
Drywall Insulation FAQs, answered by experts

Wall anchors are suitable for drywall and plaster walls, which are common in most homes. However, different wall materials may require specialized anchors. For concrete or masonry walls, you'd typically use concrete anchors. When dealing with other wall types, such as brick or tile, specific anchors designed for those materials may be necessary. Always consult with a hardware specialist or check the manufacturer's recommendations to ensure you select the appropriate anchors for your specific wall type.

How you hang the drywall can affect the finishing process. It's often easier to finish horizontal drywall panels, as the seams run across the wall rather than up and down. Standard drywall panels are 48 inches wide, so the seam is easy to reach without bending down or stretching your arms.

When choosing materials for finishing basement walls, consider factors such as moisture resistance, durability, and fire resistance. Opt for materials specifically designed for basement environments, like moisture-resistant drywall or cement board. Insulation with vapor barriers can help regulate temperature and prevent condensation. Consider using mold-resistant paints or coatings. 

Research and consult with experts to select materials that are suitable for your specific basement conditions and intended use. Prioritize quality and compatibility to achieve long-lasting and aesthetically pleasing results.

The easiest way to tell if a wall is load bearing is to check if it’s an exterior wall or if it runs perpendicular to the joists above and below it (or parallel to beams). Exterior walls are almost always load-bearing, and walls that run under beams or parallel to them are also usually load-bearing. There are exceptions to these rules, and walls that don’t fit into these categories can still be load-bearing. If you’re unsure, hire a structural engineer to look at your home to assess whether or not the wall is structural.

There is no way to cut drywall without making dust, but you can reduce the amount of dust and especially the dangerous airborne particles by using manual cutting tools. Using a utility knife to score and snap your drywall will minimize dust production, and a jab saw for cutting cutouts for boxes and fixtures will generate almost no airborne dust. Even if you use these methods, you should still wear a respirator and safety goggles to avoid damage to your lungs and eyes.

The Dale, TX homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.