Get matched with top backsplash installation pros in Chappell Hill, TX

You can use sanded or unsanded grout for a shower pan, but sanded grout isn’t the best option for shower walls. For those areas, you’ll want to use unsanded grout, which works well on vertical surfaces and is less likely to slump than sanded grout. Alternatively, you can use epoxy grout for shower walls.

Yes, unfortunately, it is normal for wall and floor tiles to crack, especially when you drop heavy items on tiled floors or place heavy objects on them. Tiles are also more susceptible to cracking when ceramic tiles designed for walls are installed on floors, as these are often not strong enough to handle heavy loads from foot traffic and furniture. Similarly, tiles that are installed incorrectly, lack adequate subflooring, or have other installation problems are prone to cracking. To avoid these problems and the inevitable repair and replacement costs they bring, always hire a professional for tile work and follow best practices for installation.

Yes, you can install a backsplash directly onto drywall, provided the wall is properly prepped, clean, and dry. For best results, especially in kitchen areas, your walls should be made of moisture-resistant drywall, often called green board. If your current wall isn't moisture-resistant, it's recommended to replace it before installing the backsplash. For even greater protection against water damage, you can remove the existing drywall and install a tile backer board or cement board instead. While properly installed standard drywall is typically strong enough to support a backsplash, some local building codes may require water-resistant materials in kitchen areas, so it's a good idea to check.

There are several different products that allow underwater repair. Pool putty can help repair chips, cracks, and loose tiles without draining your pool, but it should only be used for a temporary fix. Certain two-part epoxy adhesives will cure underwater, too. That said, while it is technically possible to fix pool tiles underwater, it is usually not ideal, depending on the depth of your pool. You will still have to reach the tile, which means you might have to dive and make the repair while submerged.