Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
How Much Does It Cost to Hire a Structural Engineer in Tampa? [2025 Data]
Normal Range: $456 - $951
Hiring a structural engineer in Tampa, FL costs $628 on average, or between $456 and $951, depending on the exact services you need from a pro.
How we get this data
Photo: skynesher via Getty Images
Photo: skynesher via Getty Images
Cost Insights
Structural engineer costs in Tampa range between $100 and $150 per hour.
Tampa building permits for residential projects cost $1 per square foot, averaging from $600 to $2,400, plus a 2.5% Florida Building Permit Surcharge on your permit total.
A Tampa structural engineer’s report costs between $450 and $950.
Structural engineering inspections cost $350 to $1,500, depending on the type you need.
Average structural engineer costs in Tampa range from $456 to $951, with most homeowners spending an average of $628. While Tampa’s cost of living is 3% below the national average, professional engineering services are comparable to those in other parts of the U.S.
Given Tampa’s hurricane risk and the potential for hurricane-related damage, hiring a structural engineer is often necessary after a storm. Tampa also has one of the country’s highest rates of new residential construction, keeping the city’s structural engineers gainfully employed by local homeowners.
The main factors impacting Tampa homeowners’ structural engineering costs are project complexity, inspection type, and required drawings.
Structural Engineer Cost Factors
How much you’ll pay to hire a structural engineer in Tampa, Florida, depends on a variety of factors. Here’s a closer look at how your total breaks down.
Fee Structure
When hiring a structural engineer in Tampa, you will pay per project, per hour, or per square foot. If your engineer charges by the project, they may either charge a flat fee or a percentage of the entire renovation cost or the cost to build your house. The type of billing depends on the professional and the exact scope of work requested.
A structural engineer’s fee typically includes necessary manhours, on-site design consultation with an engineer or architect, evaluation of your property’s structural integrity, and a findings report. Their fee does not include trip charges, general contractor fees, permitting fees, or actual project costs such as materials, labor, or post-construction cleanup fees.
| Price Structure | Average Cost |
|---|---|
| Per project (fee) | $2,000–$8,000 |
| Per project (%) | 1%–5% |
| Per hour | $100–$150 |
| Per square foot | $1–$10 |
Project Complexity
The cost of a structural engineer will also vary based on the complexity of your project. If you’re just building an add-on to your existing home, your engineer will have minimal work to do to ensure the addition is safe.
If you’re instead altering your roof structure, replacing standard beams with more supportive steel I-beams to open up your space, or removing load-bearing walls, your engineer will have more work to do and will charge more accordingly. Custom new construction projects are the most involved work for a structural engineer and will typically be the most expensive. Costs can also increase if you’re hiring an engineer for complex projects like assessing your foundation, your home’s structural integrity, or soil issues on your property following a hurricane.
Type of Inspection
When working with a structural engineer, an inspection is the first step—and may also be the only step, depending on why you’re hiring them. A structural engineer charges a flat fee for inspections, including checks during the sale of a home. The cost of a structural report averages $700, but prices can range from $450 to $950, depending on the size of your home and the complexity of your project.
Your structural engineer inspection cost will likely reach $1,000 to $3,000 if you’re having your professional investigate suspected foundation issues, including foundation cracks, bowing foundation walls, wavy rooflines, or sagging or squeaky floors.
Structural engineers in Tampa are often hired to assess a home’s structural integrity after major storms. Structural damage inspections allow your engineer to recommend necessary structural repairs to restore your home’s safety.
These are the average costs associated with common types of structural engineering inspections.
| Type of Inspection | Average Cost |
|---|---|
| Beams/joists/trusses | $350–$500 |
| Buying or selling a home | $250–$900 |
| Foundation damage | $500–$1,000+ |
| Home remodel | $500–$1,500 |
| Load-bearing walls | $350–$1,000 |
| New construction | $400–$600 |
| Storm damage | $500–$1,000 |
Engineer Plans
Engineer plans are the drawings that detail your construction project, and in the case of new construction, they’re the plans that an architect and builder will work off of to construct your home safely.
The engineer plans themselves, and the process to produce them, will cost you anywhere from $500 to $3,000, depending on the scope of the project. The cost can be much higher for more complex, large-scale projects, sometimes reaching 45% of the engineering budget.
It’s a good idea to budget an additional $300 to $700 for revisions in case you want to make changes after the first round of drafting. Additional revisions after that point will cost about the same amount.
Here are average prices for standard drawings that Tampa homeowners might request from a structural engineer.
| Drawing Type | Average Cost |
|---|---|
| Commercial construction | $10,000–$80,000 |
| Home add-on or bump-out | $2,500–$6,000 |
| Major home renovation | $3,000–$6,000 |
| New construction | $3,000–$12,000 |
| Outbuilding construction | $1,000–$8,000 |
Additional Structural Engineer Costs
Tampa homeowners should consider additional costs when hiring a structural engineer. Here’s a look at some other expenses that can impact your project.
PE Stamp
In most cases, a professional engineer (PE) stamp is bundled into the total project cost, which includes drawings, designs, calculations, and permit-ready plans. However, if you have existing plans from an architect or designer and just need a PE stamp from a licensed structural engineer for obtaining project permits, expect to pay between $500 and $1,500 for them to review your plans.
How much you’ll pay depends on the level of review and calculations required, whether any revisions or updates are needed, your engineer’s rate, and your project’s complexity. The more involved the engineer needs to be, the higher the cost for their stamp.
Permits
You don’t need a permit to hire a structural engineer, but you’ll need one to carry out your construction plans after their work is complete. In the city of Tampa, permit fees are calculated based on the estimated cost of your project and the type of permit you require.
As a general guideline, Tampa building permits cost $600 to $2,400, but your actual total is based on the city’s per-square-foot permit rate, which is $1 per square foot for new residential construction, additions, and alterations. There is also a Florida Building Permit Surcharge of 2.5% of your permit value.
If you’re obtaining permits for a commercial construction project, fees may reach several thousand dollars, depending on your scope.
Taxes
The combined state, county, and city sales tax in Tampa is 7.5%, but it’s important to note that this tax doesn’t apply to professional services, like hiring a structural engineer. However, if your engineer is providing any building materials or tangible property improvements, you’ll be charged sales tax for that portion of your project. It’s wise to ask your structural engineer if they’ll invoice you strictly for professional services so that you can avoid surprises on your final bill.
Can a Structural Engineer Add Value to Your Home?
Hiring a structural engineer doesn’t have a specific return on investment (ROI) itself—instead, your returns will depend on the type of project you’re completing after they’ve completed their services. For example, if you hire a structural engineer in Tampa because you’re building a home addition, you may see an ROI of 20% to 50% on your project. If you’re hiring a structural engineer for a pre-purchase home inspection or for post-storm soil inspection, your ROI will be less significant.
How Angi Gets Its Cost Data
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
The homeowners guide to structural engineering services
From average costs to expert advice, get all the answers you need to get your job done.
A new steel I-beam is more durable than a wooden one. Learn what factors can affect steel I-beam installation costs and how to budget for this project.
A damaged main support beam can cause serious structural damage to your house. Learn how much it costs to replace a main house support beam.
Steel beams are critical framing components that support your house. Learn about steel beam sizes and how to determine what size steel beam you need.
Learn why it might be a good idea to hire a structural engineer for a home inspection in addition to a general home inspector when you’re purchasing a home.
Removing columns can open up a space, but you’ll need to exercise caution to avoid damaging your home’s structure. Use these steps to find out if your column is load-bearing.