Get matched with top masons in Crescent, OR

Q: What is the strongest material for a stone house?

• <div><p>Granite is the strongest commercially available stone houses are built from. It&rsquo;s also more commonly available, which means transport costs aren&rsquo;t as high because a granite quarry isn&rsquo;t too far from a build site. Limestone and sandstone are popular materials as well, but they aren&rsquo;t as strong or weather-resistant as granite. </p></div>

Q: Do I need to prime or seal a brick fireplace before painting?

• <div><p>Yes, it is essential to prime or seal a brick fireplace before painting. Brick is a porous and highly absorbent material, so without a primer, paint can seep into the surface, resulting in uneven coverage and allowing the natural brick color to show through. To avoid this, apply one or two coats of a masonry primer. The primer will seal the brick and provide a smooth, uniform layer for the paint to adhere to. Ensure the primer is completely dry before applying the topcoat of paint.</p></div>

Q: Why can’t I drill into the brick?

• <div><p>Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.</p></div>

Q: What’s the difference between stone veneer and real stone?

• <div><p>Real stone is exactly what it sounds like: It&rsquo;s real stone sourced from the earth without additives. It is durable and unique, but it&rsquo;s difficult to work with because of its weight, challenge in sourcing, and high cost. Stone veneer mimics the look of real stone but is actually engineered with a mixture of Portland cement, natural minerals, and a colorant. While it&rsquo;s more affordable and easier to work with, it&rsquo;s less durable and may appear manufactured to the trained eye.</p></div>

Q: What type of drill is best for brick?

• <div><p>The best tool for drilling into brick or mortar is a rotary hammer drill which is a large hammer drill with low rotation speed and high torque. Regular drills with a hammer function are also excellent tools for drilling into brick when the diameter of the hole is 1/2 inch or less. It might be possible to drill into brick with a standard drill if you&rsquo;re only drilling a very small hole, but note that masonry work will put a lot of wear on a standard drill, and the tool may not be strong enough to get through brick.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your masonry work project in Crescent, OR?

Select your specific project to find the pro for you.

Verified Reviews for Masonry Work pros in Crescent, OR

*The Angi rating for Masonry Work companies in Crescent, OR is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Masonry Work needs.

*The HomeAdvisor rating for Masonry Work companies in Crescent, OR is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Masonry Work needs.

Last update on August 12, 2024

Reviewed in August 2024
Very detailed. Job done right. 1st Principles mentality. On time and on budget. 100% recommended.
Reel Electric & Service, LLC
Request a quote
Reviewed in September 2023
He did a great job on my fence! It looks great!
Defensible Space Management LLC
Request a quote
Reviewed in February 2023
Our deck rebuild is beautiful-these excellent builders are great designers, meticulous regarding all details, reliable, good communicators & price fairly-a solid great choice!
Howerton Brothers Construction
Request a quote
Reviewed in November 2022
Great job and very fast
Northwest Quality Roofing LLC
Request a quote
Reviewed in August 2021
Equipment, which is hard to come by these days was set aside for my job once contract was signed. Schedule and arrival was a very smooth process with plenty of communication in between. Sales/estimator was professional as was the installer. Left both work area’s clean.
Shiloh Water Systems
Request a quote
Reviewed in August 2020
Quick response, came the same day, Good people.
JW CONSTRUCTION INC
Request a quote
Reviewed in June 2020
Josh is great got right on it. Communicate well very professional and thorough on the job will work with them for all are roofing needs.
More Roof Life, LLC
Request a quote
Reviewed in September 2017
Excellent; Brad was very timely and responsive.
Brad Clement General Contractor
Request a quote

Find Masons in Crescent

Ram Jack West

4.7(

)

Serving Crescent, OR and surrounding areas

Approved

In business since 2000

Free estimates

Emergency services offered

"This contractor is highly skilled in their trade. From the top of the organization to the bottom of the organization, everyone was courteous, attentive, and professional. Their work was deployed quickly and well organized. Over the past decade, my organization has completed fourteen (14) complex and successful stabilization of foundations. As needs arise, we will likely continue to work in collaboration with Ram Jack West."

+10

Response time1 day

Response rate88%

4 neighbors recently requested a quote

Request Quote

Dicks Construction and Excavation LLC

5.0(

)

Serving Crescent, OR and surrounding areas

Approved

Super Service Award Winner

In business since 2025

Free estimates

Emergency services offered

"He did our car ports, shop and driveway. Very professional and did great work"

+46

Response time11 hrs

1 neighbors recently requested a quote

Request Quote

Cartwright Construction LLC

5.0(

)

Serving Crescent, OR and surrounding areas

Approved

In business since 2015

Free estimates

Credit card accepted

"Very high quality work in a timely fashion. Builder was very friendly and a pleasure to work with. Highly recommend this contractor"

6 neighbors recently requested a quote

Request Quote

TerraFirma Foundation Systems

5.0(

)

Serving Crescent, OR and surrounding areas

In business since 2005

Free estimates

Warranties offered

"Being on the coast and close to wetlands, there is a ton of water accumulation in my crawlspace. Terra Firma had a ton of work to dig out the drainage trenches but they did a wonderful job! They had a large crew that tackled different projects to get it all done in 1 day. Everyone was professional and very friendly. I will definitely use them again for my continual foundation improvements."

+11

Response time7 hrs

Recommended by77%of homeowners

Request Quote

Mid Valley Building LLC

3.6(

)

Serving Crescent, OR and surrounding areas

In business since 2008

Free estimates

Emergency services offered

"They did a really good job. They talked to me, and I really liked them"

Recommended by75%of homeowners

Request Quote

Hampton Enterprise LLC

3.7(

)

Serving Crescent, OR and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"They were good. They were pretty fast and came on time. My overall experience with them has been good."

Recommended by60%of homeowners

Serving Crescent, OR and surrounding areas

In business since 2002

Free estimates

Emergency services offered

"Someone showed up on the wrong day which didn't work for my schedule. The person that came out needed to work on his customer service."

Recommended by53%of homeowners

Request Quote

JBC Group Solutions Inc

4.0(

)

Serving Crescent, OR and surrounding areas

In business since 2007

Emergency services offered

"I have been using them for 3 years for multiple projects and would not go to somebody else. They also built a cabin in the woods. It was built 10 miles from the road so it was like carrying all the stuff up the path. They also did the garage and remodeling of the house, mostly kitchen and a little bit of plumbing work in the bathroom. I am still using them and I would be using them for the next thing that will be coming up too."

Recommended by75%of homeowners

Request Quote

Hardcastle JM Construction

3.5(

)

Serving Crescent, OR and surrounding areas

In business since 1989

Free estimates

"Jeff is professional, communicates well and is a pleasure to work with. When bidding our job he included all aspects of the work and recommended additional tasks as well. We had him handle everything. The work was completed as bid and the quality exceeded our expectations. We are very pleased to provide a strong positive recommendation for Jeff Hardcastle."

Recommended by66%of homeowners

Serving Crescent, OR and surrounding areas

In business since 2014

Free estimates

"Able to be flexible in difficult circumstances."

+12

Response time1 day

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 18

Masonry questions, answered by experts

Granite is the strongest commercially available stone houses are built from. It’s also more commonly available, which means transport costs aren’t as high because a granite quarry isn’t too far from a build site. Limestone and sandstone are popular materials as well, but they aren’t as strong or weather-resistant as granite.

Yes, it is essential to prime or seal a brick fireplace before painting. Brick is a porous and highly absorbent material, so without a primer, paint can seep into the surface, resulting in uneven coverage and allowing the natural brick color to show through. To avoid this, apply one or two coats of a masonry primer. The primer will seal the brick and provide a smooth, uniform layer for the paint to adhere to. Ensure the primer is completely dry before applying the topcoat of paint.

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

Real stone is exactly what it sounds like: It’s real stone sourced from the earth without additives. It is durable and unique, but it’s difficult to work with because of its weight, challenge in sourcing, and high cost. Stone veneer mimics the look of real stone but is actually engineered with a mixture of Portland cement, natural minerals, and a colorant. While it’s more affordable and easier to work with, it’s less durable and may appear manufactured to the trained eye.

The best tool for drilling into brick or mortar is a rotary hammer drill which is a large hammer drill with low rotation speed and high torque. Regular drills with a hammer function are also excellent tools for drilling into brick when the diameter of the hole is 1/2 inch or less. It might be possible to drill into brick with a standard drill if you’re only drilling a very small hole, but note that masonry work will put a lot of wear on a standard drill, and the tool may not be strong enough to get through brick.

The Crescent, OR homeowners’ guide to masonry services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
May 30, 2026May 30, 2026
How Much Does a Stone Patio Cost? [2026 Data]
Discover the true stone patio cost to plan your budget. Learn about material, labor, and cost factors to estimate your project and make informed decisions.
Deane Biermeier
•
May 30, 2026May 30, 2026
How Much Does Brick Wall Repair Cost? [2026 Data]
This guide features information on the costs to repair a brick wall, whether or not you need a brick mason to complete spalling, tuckpointing, or a full restoration.
Timothy Moore
•
Apr 4, 2026Apr 4, 2026
How Much Does Door or Window Lintel Replacement Cost? [2026 Data]
Door or window lintel replacement costs $400 on average, but there are ways you can save. On the other hand, complicated work will increase costs considerably.
Taylor Freitas
•
May 2, 2026May 2, 2026
7 Types of Bricks and When to Use Them in Masonry Projects
Burnt clay bricks are the most popular option in modern construction, but there are others to consider as well. Here’s a look at seven common types of bricks.
Chelsea Van Bloom
•
Apr 10, 2026Apr 10, 2026
Historic Brick Masonry Restoration Guide
If you own a historic brick home, you’ll want to pay attention to cracks, moisture, and settling—and greenlight a historic masonry restoration if they arise.
Scott Dylan Westerlund
•
May 3, 2026May 3, 2026
How Much Do Bricks Cost? [2026 Data]
This guide estimates how much you can expect to pay for bricks, whether you're purchasing individual bricks or ordering a pallet for your home project.