Get matched with top roofers in North Bloomfield, OH

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.

Yes, you should seal and cap an unused chimney to protect it from damage. Sealing the structure helps prevent moisture damage, which can lead to issues like cracks, spalling, efflorescence, and damaged mortar joints. Capping the chimney is also crucial to prevent blockages, damage from invasive critters, and downdrafts, while still allowing for proper air ventilation to manage moisture. For the best results, consult a chimney professional to select the right type of chimney or flue cap for your home. It's also wise to continue with annual chimney inspections to maintain the structure's integrity.

You’re going to need a permit for nearly every roof-raising project. This is a very important step, as the work you’re doing has serious safety considerations. Professionals are the ones to handle this type of work—including sourcing the permits—as they have the expertise required to perform the work safely. Insurance and warranty are usually voided if you do this work without a permit, and you may even be required to halt construction and tear it down as a penalty for working without a building permit.

Homeowners insurance sometimes covers roof decking, but it depends on the cause of damage and whether the decking was properly installed. If the roof decking was damaged by a severe storm, then it will likely be covered. Insurance may also pay for roof decking work if building codes require it. However, insurance won’t cover damage caused by normal wear and tear or poor maintenance practices.