Get matched with top roofers in Vienna, OH

Roof raking can damage shingles if improperly done. Be sure to use a rake that’s designed specifically for removing snow from a roof, and don’t use excessive pressure. Light, consistent pressure to pull down the bulk of the snow is all that’s needed—if you clear right down to the shingles, you’re probably using too much force and risking roof damage.

Some people prefer to use connectors consisting of galvanized metal to replace the birdsmouth cuts on the rafter board. Common names for these metal pieces include hurricane ties and variable-pitch connectors. Making birdsmouth cuts is more cost-effective than purchasing these connectors for each rafter. However, because making large birdsmouth cuts to accommodate extra-wide exterior walls can weaken the rafter, a connector may be the better option in some cases.

No, a chimney crown is not the same as a chimney cap. A chimney crown is a flat cement area on top of a masonry chimney. It starts where the masonry part of the chimney ends at the very top and domes upward toward the flue opening. A chimney cap sits on top of the crown over the flue. It is usually made of metal and allows smoke to escape without letting in rainwater.

While the terms are often used interchangeably, wood shakes and wood shingles have notable differences, primarily in their manufacturing and appearance. Wood shingles are machine-cut on both sides, resulting in a smooth, thin, and uniform product. In contrast, wood shakes are typically hand-split or sawed on only one side, giving them a more textured, natural, and rustic appearance. Due to these manufacturing differences, shakes are generally thicker, heavier, and less uniform than shingles. They are also more expensive. Homeowners seeking a more rustic aesthetic often choose shakes, while those preferring a more uniform look may opt for shingles. Both are installed in an overlapping pattern to create a durable, weather-resistant roof.