Get matched with top toilet pros in Creston, OH

You generally cannot replace a 10-inch rough-in toilet with a 12-inch model without making significant plumbing updates. A 12-inch rough-in toilet will not fit a 10-inch rough-in space because the floor drain is in the wrong position. To accommodate the larger toilet, you would need to move the drainpipe, which could cost between $0.75 and $30 per linear foot, plus labor. In most cases, it is more cost-effective and simpler to purchase a new 10-inch rough-in toilet. However, it is possible to install a 10-inch rough-in toilet in a 12-inch space by using a longer connector.

There are several ways to save money on a bathroom remodel through proper planning and savvy design strategies. To reduce costs, consider the following:

• Purchase your own materials: Buy your own bathroom fixtures, hardware, and other materials to avoid contractor upcharges and delivery fees.

• Shop smart for big-ticket items: Save on pricey items like tiles and tubs by shopping sales and at discount stores.

• Avoid major layout changes: Keep plumbing in its current location. Opt to replace fixtures rather than moving them to avoid significant renovation work.

• Focus on high-impact, low-cost updates: Make affordable but impactful smaller changes, such as upgrading hardware, installing new lighting, and adding stylish but economical accessories.

• DIY where possible: Handle easier parts of the remodel yourself, like painting or installing light fixtures, to save on labor costs.

• Time your remodel strategically: Consider remodeling in the spring, which tends to be a lower-demand time of year and may result in lower costs.

If your toilet is still leaking after replacing the toilet flapper, then you may not have installed the toilet flapper correctly. Double-check that you have placed the flapper over the overflow tube correctly, and check the flapper chain is at the right length. If your toilet is still leaking, then you may have another problem on hand. For example, you may need to replace the toilet wax ring or replace the toilet fill valve if your toilet is wobbly and leaking from around the base.

The toilet should rest 10, 12, or 14 inches from the back wall. As for other clearances, 15 inches is the minimum distance from the flange to any side wall or nearby fixture, including the shower, tub, and sink. Modern codes also require at least 24 inches of clear space in front of the toilet.