Get matched with top roofers in Clarksville, OH

Architectural shingles typically last between 20 and 30 years. While some manufacturers provide warranties for 30 to 50 years, particularly for extreme weather, achieving such a long lifespan is uncommon. The actual life of your shingles can be shorter if you live in an area prone to strong winds, hailstorms, or other severe weather. To avoid the risk of roof failure and costly water damage from leaks, it is recommended to replace your roof before it reaches the end of its expected life. Scheduling regular roof inspections every few years is a good way to assess your roof's condition and determine the best timeline for replacement.

Homeowners insurance does not usually cover roof soft spot repair. Since this damage is usually caused by wear and tear and often found on aging roofs, your insurance claim will likely be rejected. If a soft spot develops due to damage from a storm, repairs may be covered, but in general, expect to pay out of pocket for soft spot repairs.

Though cedar shakes often get confused with shingles, there are a few key differences between wood shakes and wood shingles. For one, cedar shingle prices are lower, although shingles are less durable than wood shakes. Cedar shakes are thicker than shingles (shingles range from about 3/8 to 1/2 inches thick, compared to 1/2 to 3/4 inches thick for shakes). Wood shakes are handmade, while shingles are usually machine-made. Also, wood shakes work better on steeper roofs than shingles do. While the cost of cedar shingles is more budget-friendly, there are many great reasons to choose shakes.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.