Top-rated structural engineers.

Best structural engineers near Salisbury Mills, NY

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Salisbury Mills, NY?

Select your specific project to find the pro for you.

Top-Rated Structural engineers in Salisbury Mills - Updated Nov 2026

Avatar for Advant Engineering, Inc.
Advant Engineering, Inc.
5.0(
99
)
Engineer - Structural

Serving Salisbury Mills, NY and surrounding areas

Approved

In business since 2001

Free estimates

Credit card accepted

"I hired Mr. Csak as a consultant to advise me on structural improvements for my home. He did an excellent job. He had a very organized approach. We walked the exterior of the property first and along the way he pointed out all the key issues. Then we did the same with the interior. Louis didn’t just focus on the site of the proposed improvements but he evaluated the entire property, so that he could give me reasoned, detailed advice about my project. He understood the big picture, but he also got down on his hands and knees to take very precise measurements, when necessary. He was very focused on my safety in the home and made sure to test for radon, even though that was outside the scope of the engagement. Since Louis is a professional, licensed engineer you are getting someone with deep technical expertise who also has years of practical applications. Louis is very honest and forthright. He is a true pleasure to work with and I would use him again. I recommend him most highly."
Church Inspection
Foundation Shoring
Recommended by90%of homeowners
Avatar for Evolution Drafting
Evolution Drafting
3.7(
127
)
Draftsperson/CADDArchitectArchitect - For Business

Serving Salisbury Mills, NY and surrounding areas

Approved

In business since 2018

Free estimates

Emergency services offered

"I am having a full master bath and kitchen remodel done with new layouts in both rooms and knocking out a wall. Evolution worked with me to quickly get a drawing done of the new layouts so that the contractor could get started on the project. They made sure to include me in the process so that the design would be done exactly as my wife and I envisioned. They communicated effectively throughout the process and were always courteous and professional. I recommend them to anyone with drafting needs."
Zeal Floor Plan
Charcoal
Palm Floor Plan
Charcoal Floor 2
Charcoal Floor 1

+23

Response time1 day
Response rate100%
66 neighbors recently requested a quote
JAFPC Architect
5.0(
2
)
Architect

Serving Salisbury Mills, NY and surrounding areas

Approved

In business since 1989

Customers say: Quick response

John Anthony Ferraro P.C, Architect is a diverse practice with experience in schools, religious buildings, residential, municipal and commercial. \n \nIt is my philosophy that Architecture is sculpted by Client needs. \n \nThis thought process orchestrates a unique Client/Architect relationship from preliminary design through construction documentation. \n \nLicensed and insured in nine states, my practice offers comprehensive expedient service. I dedicate myself to providing professional and creative design in harmony with local and state requirements. \n \nAs a member of the American Institute of Architects and nationally certified by the National Council Architectural Board, I mandate all documentation is executed with the highest professional and ethical standards. This assures each client excellence in the practice of Architecture. \n \n \nI trust you will find my qualifications satisfactory. \n

Response rate88%
Recommended by100%of homeowners
Avatar for Northeast Architecture PLLC
Northeast Architecture PLLC
5.0(
1
)
ArchitectArchitect - For Business

Serving Salisbury Mills, NY and surrounding areas

Approved

In business since 2022

Offers commercial services

Its best to contact us by phone or email - see our website! Northeast Architecture PLLC is a full service architecture firm location in New York's Hudson Valley. We specialize in residential and small commercial projects and in historic preservation. Licensed in New York and Vermont. The owner Sal Cuciti is a registered architect with over 30 years experience with projects from $100k up to $10M. In 2023 he founded Northeast Architecture to put that expertise to work for your project and make your dreams a reality. We love talking ON THE PHONE with people about their projects, you will get a free evaluation and there is absolutely no obligation or hard sell.

South side
South side 2
side porch
interior
interior2

+4

Response time4 hrs
Response rate100%
6 neighbors recently requested a quote
Avatar for iBLUPRINTS
iBLUPRINTS
5.0(
1
)
Draftsperson/CADD

Serving Salisbury Mills, NY and surrounding areas

Approved

In business since 2017

Free estimates

Credit card accepted

Simply snap a few pictures using your own phone, and email them to us!! We turn your pictures and ideas into construction documents. Virtually walk through your addition before its even started, just like on your favorite TV shows! \n \nWe are currently serving CT, MA, NH, NY, VT, NJ, PA, TX and TN. \n \nALL GREAT PROJECTS START WITH GREAT PLANS

Response time2 hrs
Avatar for Terraform Development & Design LLC
Terraform Development & Design LLC
4.0(
1
)
ArchitectDraftsperson/CADD

Serving Salisbury Mills, NY and surrounding areas

Approved (Corporate)

In business since 2023

Free estimates

Offers commercial services

Terraform Development & Design LLC, delivers expert permit-ready architectural plans and drafting services nationwide. With 8+ years of experience and hundreds of clients across all 50 states, we create code-compliant residential and commercial construction documents that get approved fast and built right. \nFrom site plans, floor plans, elevations, structural & foundation drawings to MEP coordination, full construction sets, 3D renderings, interior design, solar PV layouts, and precise material takeoffs - we handle it all. Fast 4-6 week turnaround, 3 design revisions included, free revisions for city redline changes, transparent pricing (starts at $2,000), and direct partnerships with licensed engineers for stamps in every state.

860 neighbors recently requested a quote
IronCraft Remodeling LLC
New to Angi
Draftsperson/CADD

Serving Salisbury Mills, NY and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

IronCraft Remodeling LLC – Quality | Integrity | Craftsmanship\nWelcome to IronCraft Remodeling LLC! We are a fully licensed and insured residential remodeling company in NJ, delivering high-quality craftsmanship, reliability, and precision to every project.\nOur Core Services:\n Complete Interior Remodeling: Kitchens, bathrooms, and living spaces.\n Drywall & Painting: Sheetrock installation, smooth finishing, and premium painting.\n Custom Tile Work: High-end floor and wall tile installation, including large-format porcelain and custom showers.\n Decks & Carpentry: Custom deck construction, structural repairs, and exterior woodwork.\nWhy Choose Us:\n High-quality materials and clean worksites.\n Honest, transparent estimates with zero hidden fees.\n Dedicated to completing your project on time and right the first time.\n

Avatar for Great Designs Inc
Great Designs Inc
5.0(
24
)
ArchitectArchitect - For BusinessDraftsperson/CADD

Serving Salisbury Mills, NY and surrounding areas

In business since 1970

Free estimates

"Working with Mark was easy and efficient. He talked through what we were looking for in additional space (master bedroom suite) and we worked out all of the small details. We love the old New England look of our home and he was able to capture that look in his plans while giving us the modern updates we were looking for (closets and a large bathroom). He gave us 3 versions of the overall design to choose between. Once we had chosen the design, he produced the building plans. He also coordinated with an engineer to do the engineering report. All the while, he was extremely responsive and reached out whenever he had a question about what we were looking for. I highly recommend working with him!"
Recommended by100%of homeowners
Avatar for Structure Build
Structure Build
4.6(
25
)
Engineer - Structural

Serving Salisbury Mills, NY and surrounding areas

In business since 1997

Free estimates

Credit card accepted

"Since I Moved to New York me and my husband we find that  it will be a big problem for as to find a good contractor that can help us to get done the construction and remodeling at our new house that we bought in woodlands ..
The first problem was that houston doesnt have any specific requirements, certification or license for contractors  what means is it a big problem to track them ..
The second problem we had that we did t have any friend for recommendations...
We found a couple of contractor on home daviser and yelp and we decided to give a try...
We received a couple of bids form them and we decided to go with the one that gave us the best bid ...,,Houston Renovation & Remodeling,, But after they begin the work we find out that this company has very poor experience in construction and the worst think was   that they begin to overcharge us saying that a lot of thinks waren t indicated in the bid.. Yes we where very upset   and we decided to not work with that company.. We called again the company's that we received the bids and we asked them to rebid the job and we asked them to specify all the details that will be included and witch not..  After we received the new Bids Structurelne Construction Has the most accurate bid they also specify all the details even the garbage removal...  My husband sad that he will go with Structure Construction  and I was agree with..
It took approximately 2 month for them to finish the Remodeling In our 4 bedroom House but  we are very satisfied with the results ..
They helped us to update the old 2 Bath, replacing all ceramic tiles and bathtubs..
We did replaced all flooring in the house we did update our old kitchen and closets...
and walls Restoration, new moldings  and painting.   Now all looks great and we are happy with the changes we did in the house..
Hope i will call them soon for some exterior work  and I am expecting to receive a good quote .. Thanks for all .."
Recommended by94%of homeowners
Avatar for John Halsey Architect RA
John Halsey Architect RA
4.9(
21
)
ArchitectArchitect - For BusinessDraftsperson/CADD

Serving Salisbury Mills, NY and surrounding areas

In business since 2000

Free estimates

"We deciding to bring on an architect after we realized our home improvement project was going to be a large one. We found John on Angie's List and were impressed by the number of highly rated reviews which touted his responsiveness and capabilities. After reaching out via his website contact form (over a weekend!), he got back to us within a day and scheduled a visit to talk about our project. He was very accommodating in working around our schedules. His initial visit did require a nominal fee ($90), but it was then applied to our contract. We explained our project to John, which includes a two story addition, with a family room on the first floor (including a new fireplace and chimney) and large walk-in closets connected to our bedroom on the second floor. In addition, it involves expanding our master bathroom into the old walk-in closet, as well as creating a complex deck and patio area in the rear of our home, including a roofed-covered section and a built-in gas powered grill. We only had general ideas of what we wanted, but not how the pieces would come together, and weren't even sure if we wanted the addition to go forwards or backwards from our current home structure. In the very first meeting, John brought some great ideas to the table and we knew he was the right person for the job. Because we were unsure of which way would be best to layout the new addition, John was patient with us and worked through two different sets of plans, in order for us to see how the ideas would play out. He worked with the town to understand our options for setbacks, variances, and zoning. He made recommendations, but also listened to our thoughts and reasons and worked them in as best he could. He likely had his own ideas about what was the best way to go, but allowed us to come to the same conclusion after several revisions. What was really great is that he clearly cares about style and look/feel. He knew our home was a Victorian and wanted to make sure we didn't deviate from that feel. He didn't just create boxy shapes, but figured out how to make elements and rooflines flow into each other and create visually appealing connection points. He also made sure we were considering important value points, like windows, wall space, ease of entry, ceiling height, etc. He truly cares about the quality of the end result. The fact that he had opinions and would push back on us sometimes is actually really important, as he is the expert on understanding how designs can turn into a finished product. We worked through 3 iterations of both sets of plans before we decided to go out the back, instead of the front. He then worked through 4 more iterations with our feedback. John was great about understanding that feedback and ultimately if there was a place where we didn't want to compromise, he built in exactly what we wanted (as long as it wasn't a poor architectural decision). The 3D exterior mockups were super helpful in letting us visualize everything. The end set of plans is something we are really excited about. In the second phase of work, John worked on all of the details around construction, which is key for not only providing what is needed to the building departments in town, in order to get permits, but also for getting bids from contractors. As this phase drew to a close, John provided a couple recommendations for general contractors with whom he regularly works with. We ultimately ended up selecting one of his recommendations and have been happy thus far, ideally breaking ground within the next few weeks. The cost of the build portion of this project is about 20% more than we had originally budgeted for, but we did add some features in along the way that were admittedly expensive (covered/roof portion of the deck, patio, and chimney/fireplace). From start to finish, the planning phase of this project took about 2 months. Considering how many revisions we had, that could have been a lot longer, but John was very responsive to feedback, with often a 48 hour (or less) turnaround period after receiving the feedback. That includes brainstorming through the structural complexities of our requests. As for continued work with John, he has been great, even after we have finished up with the planning phase. He offers additional availability for a nominal cost if we need him for any significant time to help with the build phase, but in the meantime has been really helpful and responsive with providing additional information to our GC. I would definitely recommend John for any size architectural project!"
north New Jersey home renovation
Additional Photos
Additional Photos
Additional Photos
view from street

+8

Recommended by94%of homeowners
...
Showing 1-10 of 58
Structural Engineering FAQs, answered by experts

Indications include cracks in walls, uneven floors, and sticking doors or windows that suggest foundation movements.

A split-level home is one that has several staggered floors connected by short staircases, while a split floor plan separates the primary bedroom from the rest of the bedrooms. Split floor plans are most often found in single-story homes, while split-level homes are always at least two stories.

A construction manager is particularly useful in the case of a large-scale build with custom design elements, so it’s usually worth it to hire one. They can help manage your budget, maintain quality control, oversee timelines, and navigate unexpected hurdles. While construction managers are pricey, they can actually save money in the long run by identifying cost-saving opportunities and ensuring the project stays within budget.

Yes, they offer plans for repairs or reinforcements to address issues.

Although the two terms are closely related and often used interchangeably, pier and beam foundations and crawl spaces are different things. A pier and beam foundation is made up of concrete piers and wooden beams and creates a space under the home known as a crawl space. There are several types of foundations that create crawl spaces, often collectively known as “crawl space foundations,” but the crawl space itself is separate from the foundation. 

The Salisbury Mills, NY homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.