Get matched with top well and pump technicians in Carlin, NV

For the most part, choosing between 30/50 psi and 40/60 psi is based on your water-pressure preference. However, it can also depend a little bit on your house—if you have older plumbing, a lower water pressure can be easier on the pipes (and a bit more gentle on your well pump). 

The lower 30/50 pressure is usually enough for a single-story home, but you may want 40/60 if you have multiple stories, as the extra pressure helps water flow smoothly up to the second floor.

DIY is not recommended due to safety and technical requirements. Hire professionals for accurate diagnosis and repair.

Here are some signs of a bad well pump that a pro should look at: 

• If your well pump isn’t pumping water, you could have a leak or malfunctioning pump on your hands. 

• If your water pump runs nonstop, there might be a leak or problem with the pressure tank, which can cause the pump to fail. 

• Low water pressure can happen because of your pressure tank, low-water levels, or a wrong-sized pump. 

• Dirt or sediment in your water can be a problem with a powerful pump, damaged pump filter, or the pump’s location.

Frozen well pipes make themselves known quickly, as your faucets slow down to a trickle or shut down completely. If you notice a serious reduction in flow in the winter from toilets, showers, kitchen faucets, and other plumbing fixtures, a frozen pipe or two is to blame. Another tell-tale sign is frost or ice on exposed pipes outside.