Get matched with top epoxy flooring pros in Portales, NM

The cost to seal concrete is around $1,500 on average, but you could spend anywhere from $1,000 to $7,000, depending on the type of sealer used and the size of the space. You may want to seal concrete that receives a large amount of foot traffic or heavy wear. While you can seal concrete yourself with materials from a home improvement store, you must ensure the surface is clean and ready to accept the sealer. Hiring a professional is often recommended to ensure good, even coverage that provides adequate protection.

It costs between $600 and $8,400 to stain an average-size concrete patio of around 300 square feet. The wide price range accounts for intricate stains that incorporate multiple colors and stenciling, high-end sealers, and special touches, such as stamping or concrete polishing. Prices can also vary if you need to make multiple repairs to your patio before adding the stain and seal.

You can whiten concrete for unsealed and unfinished concrete with a solution or either muriatic acid or bleach and water—but never both. However, if your concrete does have a stain, finish, or polish, keep in mind that these hard chemicals could damage the topcoat. Your best bet otherwise is to power wash outdoor concrete slabs or clean indoor ones with a gentle cleaner such as laundry or dish detergent.

You can paint over old paint on a concrete porch. For the best results, you should first clean the surface and remove as much paint as you can. A power washer is helpful here, but you’ll also want to scrape as much of the old paint away as possible. Then you should prime the porch before repainting it.