Get matched with top plaster repair specialists in Magdalena, NM

Although their applications are very similar, no drywall compound and spackle are not the same thing. Spackle is a bit thicker and is used to patch holes as it dries quickly and is easy to sand. Joint compound shrinks a bit more and can be more temperamental to spread. However, one benefit is that you can use joint compound as spackle (for small jobs), but you can’t use spackle as joint compound.  

On average, repairing a ceiling costs anywhere from $450 to $1,750. However, there are many variables that can impact the price of this project. For example, the type of ceiling material, type and extent of the damage, and local labor rates all affect your costs. Holes and cracks are less expensive to fix, while structural issues and water damage are pricier problems.

Drying alone can take 1 to 4 hours to dry to the touch per plaster layer, but some types of plaster take several hours longer to dry. However, this doesn’t mean the job is done because plaster doesn’t fully harden until it cures, which can take a few days to a couple of weeks. It may take even longer if you’re building a new, pretty thick plaster wall. Allow the plaster to cure before painting it.

Smaller is better when patching holes with spackle. Any holes wider than four to six inches in diameter tend to be too wide to repair with spackle alone. You'll likely want to patch bigger holes with a drywall panel. 

Even holes measuring up to 6 inches may be challenging to fill with spackle alone. For best results, purchase a wall repair patch made from wire mesh. Cut the patch to fit over the hole, then use the spackle to hold it in place. Apply the spackle over the patch as you would for a smaller hole.