Get matched with top buffing and polishing pros in Los Lunas, NM

Like most stones, limestone should be sealed. Its porous nature makes it prone to staining from spills, and the iron in the stone can cause it to turn yellow when exposed to moisture or harsh chemicals. Proper sealing can help prevent these problems and protect the stone's appearance.

In many cases, it’s worth it to restore stone. Stone restoration generally costs less than replacing the stone entirely, helping to save on the cost of your project while still giving your home’s stone a polished appearance. However, if your stone is very cracked or crumbling to the point of compromising the structural integrity of your home, you may want to consider replacing it. Stone flooring costs range from $6 to $20 per square foot on average.

To remove cloudiness from marble, use equal parts baking soda and water to form a paste. Apply it to the surface, allow it to sit for at least two hours, then wipe with a microfiber cloth. Another option is adding a couple of dish soap drops to warm water and wiping the surface after you’ve applied it to the surface. You may also consider using a liquid stone cleaner.

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.