Get matched with top plaster repair specialists in Hobbs, NM

Heat can help plaster dry faster, but it's very easy to get too much of a good thing. When exposed to high heat during the curing process, plaster can dry out too quickly, leading to cracks and affecting the material's integrity. The recommended drying temperature should be listed on the plaster's packaging. If possible, set the thermostat in the room to that temperature, but not any higher.

Drying alone can take 1 to 4 hours to dry to the touch per plaster layer, but some types of plaster take several hours longer to dry. However, this doesn’t mean the job is done because plaster doesn’t fully harden until it cures, which can take a few days to a couple of weeks. It may take even longer if you’re building a new, pretty thick plaster wall. Allow the plaster to cure before painting it.

Yes, to some extent, you can speed up the time it takes plaster to dry and cure. Choose a time of year when humidity levels are somewhere in the middle, neither too high nor too low, to allow moisture to evaporate from the plaster effectively. Also, open a window or set up a fan in the room to improve ventilation.

Don't use a dehumidifier in an attempt to speed up drying time, as a dehumidifier may suck moisture from the air too quickly, leading to crumbly plaster.

Technically speaking, you can use drywall primer over plasters. However, oil-based primers work the most effectively on wall plasters. Meanwhile, water-based primers work just as well with drywalls. Nowadays, there are also universal primers suitable for drywall and plaster. Overall, you will be fine as long as you are using a trustworthy brand.