"The problem turned out to be a burned out small electric door switch. I believe the price was way too expensive for the service performed and the price of the door switch. What more can I say? It got done."
"JP Electric installed a Kohler generator for us and they did an excellent job! They were on time and on budget. The generator looks and works great and we could not be happier. HIGHLY RECOMMEND JP ELECTRIC!!!!!"
"Great. Joe Zimmerman of AAA Computers showed up on time, knew exactly what he was doing, and even supplied a power cord which was missing from the box the movers had packed the computers in. He went out of his way to make sure things were working correctly and gave me a tutorial on fixing issues by myself were additional problems to crop up."
"The electrician Alsup Electric was excellent. Responsive,timely and did what a fine job in fixing the problem I rated B more because of AHS service that was slow and complicated"
"There were many things wrong in my computer (my fault and letting grandchildren on computer) Robert was so helpful, gave me many good instructions to keep everything safe, which I have written down, feel like I have a new computer. He was so excellent and experienced, took his time and was meticulous about what needed to be done. He was a pleasure to work with and I will use this company again! Linda Disy"
"He's rewired my house and ran a line to my garage. We also sub him so he's done everything for us as well. He has got better rates than most people in the area and does a good job."
Unytel is recognized nationally for our telecommunication services that consistently exceed customer expectations. Our commitment to innovation has yielded a comprehensive portfolio of solutions that include a wide range of IT, Telecommunications, Construction, and Building Management services.We have over 16 years of experience in the telecommunications industry and look forward to working with you and your company.
We can take on a wide range of residential and commercial electrical projects to include full installation for additions and remodels as well as wiring/panel upgrades, and a variety of other projects. We take pride in the quality of our work and our commitment to outstanding results. We look forward to building strong, long-term relationships with our clients and guarantee your satisfaction.\n\n
Yes, one wire is always hot on the 3-way switch, meaning it carries the electricity from the power source to the switch. If you have a 3-wire cable in your home, you have two hot wires, or line wires, coming from the power source. Typically, you’d connect the hot black wire from the power source to the traveler wire and the hot red wire from the power source to the first 3-way switch. For the second 3-way switch, you’d then connect the hot black traveler wire to the switch.
According to the National Electrical Code (NEC), GFCI outlets should be installed in wet or damp locations where they might be splashed with water or other liquids. This is to protect against ground faults, which are more common around water. Specific areas that require GFCI outlets include kitchens (especially near counters), bathrooms, laundry rooms, basements, garages, and all outdoor receptacles. Depending on local electrical codes, you may need at least one GFCI outlet in these rooms, or every outlet in the area may need to be GFCI protected.
No, it is not safe to use an outlet that sparked. A spark from an outlet could indicate a short circuit, loose or frayed wiring, or other serious damage. Continuing to use an outlet that sparks can increase the risk of electrical shock, electrical fires, and other hazards. It's important to turn off the power to the outlet at the circuit breaker if possible and avoid using the outlet until a licensed electrician has inspected and repaired it.
Yes, a bad switch can cause other outlets not to work. If the switch is part of a circuit that controls multiple outlets, a fault in the switch can disrupt the entire circuit. It can happen if the switch is wired incorrectly, has a loose connection, or is damaged. Fixing or replacing the faulty switch can often restore power to the affected outlets
You can determine what size generator you need for a transfer switch by matching the switch to the largest outlet on your generator. Larger generators can power up to 10 circuits, while most 5,000-watt generators can provide power to six circuits. So, if your generator’s largest outlet is 30 amps, you’ll need a 30-amp transfer switch.
The Orchard, NE homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Before you hire a licensed electrical contractor, you should learn the cost to run electric from the road to your house so you can budget for the project.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.