Get matched with top stone and gravel pros in Orchard, NE

New constructions need time to “settle” and sometimes, small hairline cracks occur as a result. Larger horizontal or “stair step” cracks, however, are usually a sign of a deeper, more severe issue. It could indicate an issue with the soil beneath the home, a problem caused by an overgrown tree, or another problem.

You will repoint over a fraction of the old mortar, but you should scrape away 1/2 to 1 inch of mortar from the joints before repointing. Otherwise, the repointing is only masking the weakened mortar instead of actually replacing it, which could put your chimney at risk of bigger, more expensive damages later on.

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

A roller makes an excellent paint tool for brick. Using a roller can ensure the entire surface area gets painted evenly. If you choose a roller for painting brick, go for a thicker option, at least a half-inch. The key to using a roller while painting brick is making sure paint gets into the various crevices for even coverage.