Top-rated masons.

Get matched with top masons in Union Mills, NC

Enter your zip and get matched with up to 5 pros

Need a pro for your masonry work project in Union Mills, NC?

Select your specific project to find the pro for you.

TRUSTED BY UNION MILLS, NC HOMEOWNERS

  • Average homeowner rating star icon4.2
    Average homeowner rating
  • Verified reviews icon15
    Verified masonry services reviews

Find Masons in Union Mills

Avatar for HydroHelp911 Crawl Space & Foundation Repair
HydroHelp911 Crawl Space & Foundation Repair
4.4(
25
)
Foundation, Basement or Crawlspace - Waterproofing / EncapsulationConcrete Foundation - RaiseConcrete Foundation - Repair

Serving Union Mills, NC and surrounding areas

Approved

In business since 2017

Free estimates

Warranties offered

"Jeremy and Austin were hardworking, competent, and thorough in the completion of their jobs. They completed everything in 6 days instead of the allotted 10 days. They explained the jobs and even took pictures of completed work. They were engaging and professional and very polite. JJ Evans kept in touch with them and with me as the work progressed. I now have new floor joists and support beams, a vapor barrier, and a French drain to take away excess water. 5 Stars!!"
Before
Before
Before
After
After

+50

Response time1 day
Response rate92%
9 neighbors recently requested a quote
...
Showing 1-10 of 166
Masonry questions, answered by experts

Some older brick material is extremely hard, making it tough to create a hole. Rather than using a typical wood drill bit, always use a masonry drill bit when drilling into brick. For extremely hard brick, using a power drill with a hammer function may give you better results. The drill bit will heat up as it goes into the extremely hard brick, so you may need to stop after a few minutes and allow the bit to cool before starting to drill again.

The premise for painting a brick building is fairly simple: Prime the bricks to seal the surface and apply the top coat to protect your brick home. However, it’s easy to miss a few important steps if you’re starting from a raw brick surface and don’t know the basics of how to paint brick. So be sure to reach out to a local professional painter if you have any reservations about correctly painting your brick house.

If you’re attempting to mix and pour your own mortar, expect to pay between $5 to $10 for an 80-pound bag of mix. The cost to repair mortar, however, can range from $300 to $500 for a 20-square-foot wall. The larger the area and the more extensive the repair, the higher the cost.

If you want to make your home eco-friendly, enjoy low maintenance, and love the fact that its looks will take people’s breath away (and not because they were trying to blow your house down), then a modern brick home is right for you. You can hire a mason to get the building process started for your brick home.

But if you’re not fond of the color and don’t want to deal with the process of repointing or other repairs, consider going with vinyl or wood. These materials offer a lower cost. While they tend to require more maintenance, they don’t cost nearly the same as exterior brick house repair.

You may not need a hammer drill if you’re planning on drilling one or two very small diameter holes in brick. For holes with a diameter of 3/16-inch or less, a regular drill with a masonry bit can do the job. However, the bit will heat up quickly, and the process will take significantly longer than with a hammer drill. Prepare to cool your drill bit down in a bucket of water more often.

The Union Mills, NC homeowners’ guide to masonry services

From average costs to expert advice, get all the answers you need to get your job done.