Get matched with top drain cleaners in Mount Pleasant, NC

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

You can often unclog a garbage disposal in less than 10 minutes, though sometimes you might need longer if you’re unsure what’s causing the clog. For minor clogs, consider plunging the drain, flushing the drain with baking soda and vinegar, or using an Allen wrench to free the clog. If the clog is more severe, contact a local plumber.

Never pour used motor oil down the drain. Doing so can have serious environmental consequences, including contaminating groundwater, endangering animals, and killing vegetation. It can also clog your pipes, causing backups in your plumbing or the wastewater treatment plant. In most places, pouring motor oil down the drain is illegal, whether you do it in your home or a storm drain.

The best way to unclog a bathtub drain is to pour a pot of boiled water down the drain, being careful not to splash yourself. However, take precautions, as boiling water can damage PVC pipes and joints. Follow up with ½ cup of baking soda and ½ cup of vinegar. Cover the drain with a small sink plunger and let it sit for 15 minutes. Pour boiling water down the drain again and replace the drain stopper.