Get matched with top drain cleaners in Albemarle, NC

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

The P-trap (or S-trap in older homes) under your shower is designed to prevent sewer gas from coming back up, so you shouldn’t normally experience foul odors coming from your shower drain. If you do, the vent stack that introduces air into your plumbing system may be clogged, or you may have a more severe sewer main blockage. In either case, hire a plumber to fix the issue for you.

Although linear drains allow water to flow quickly and efficiently, they tend to clog more easily than traditional drains. Linear drains are flush with the shower floor, allowing soap scum and hair to potentially build up. They’re also longer than other drains, allowing for more space to let debris fall into the drainpipe. 

Boiling water helps unclog a drain, but usually only with a harder abrasive such as baking soda or vinegar. On its own, it isn’t the most effective tool. In addition, you shouldn’t use boiling water if you have PVC pipes, as it can soften or melt them. Use a plunger or enlist the help of a pro if you have plastic pipes.