Get matched with top arborists in Prentiss, MS

You’ll want to have your palm trees trimmed during the spring, ideally in May, before hurricane season sets in, which generally takes place during the late summer. Palm trees grow fastest over the summer months. You’ll also want to trim your palm trees when you notice:

• Brown fronds 

• Dry leaves

• Flower pods

• Fruit

• Fronds overgrown in power lines

• Frond encroaching upon your neighbor’s home or yard 

• Visible damage from a storm

If you’re wondering why tree trunks are painted white in your area, it’s usually to prevent sunscald, a condition where extreme shifts in temperature can cause tree bark to split. Fruit trees are especially vulnerable to sunscald, so this treatment is worth considering if it’s something that affects your trees.

Not all leaning trees are dangerous, but they can be a hazard as gravity may eventually cause them to fall. A key factor is whether the lean is new or has been present for a long time. Trees that have grown with a lean for years are not typically an immediate danger, but a sudden lean is a cause for concern as it often indicates weakening roots. If a tree is leaning more than 15% from vertical, you should consider having it straightened or transplanted. To be safe, it's always best to hire a professional arborist to inspect any leaning tree to assess the risk and avoid potential accidents.

There are several methods to hollow out a tree stump, and the best one depends on your tools, experience, and priorities. Common methods include using a chisel and hammer, a chainsaw, or burning.

• Chisel and Hammer: This is often considered the easiest approach for those with limited tools or experience, though it is the most time-consuming.

• Chainsaw: Using a chainsaw is the fastest method, but it comes with significant safety risks, especially for inexperienced users.

• Burning: This can be an effective method, but it is not recommended unless you can first drill holes into the stump. Without holes, the stump will be difficult to light and may not burn completely through.

A power drill with at least a ⅜-inch diameter bit can make the job quicker and easier, regardless of the primary method. While you can use a chisel or chainsaw without a drill, it will require more time and effort. Always wear protective goggles and thick gloves, as splinters are an inevitable risk.