Get matched with top backsplash installation pros in Shepherd, MI

Updating your backsplash without removing the tile is possible in a couple of different ways. First, you can remove the old grout and replace it with new grout to give your backsplash a fresh look. You can also change the grout color, which can have a surprisingly large impact on the final appearance of the backsplash. Finally, you can paint the original tile to totally change the look of the backsplash without removing it.

If you’re handling your tile removal yourself, seal the room using painter’s tape and heavy-duty contractor bags to prevent dust and shards from escaping. Use a claw hammer or a pry bar and a mallet to get behind the tile and pry it away from the floor or wall. Once your tiles are all removed, sweep everything into contractor bags for disposal, being careful not to overfill them. Make sure you wear a dust mask, safety goggles, and work gloves to keep yourself safe from injury while you work.

Grout lines should typically be between 1/8 to 3/16 inch thick. This ensures enough room for the grout to dry properly and makes them wide enough to look clean and professional. If grout lines are too small, it can be easier to see imperfections in the spacing. 

No, when done correctly, removing the tile shouldn’t damage the subfloor. However, if there was pre-existing damage to the subfloor from standard use or lack of maintenance, the subfloor may need repairs. For example, if the contractors notice mold growth on the subfloor or an uneven surface, you may need more extensive services before installing new tile.

If you DIY tile removal, remove the tiles one step at a time, individually removing the tile, grout, and mortar to prevent unnecessarily damaging the subfloor. Depending on the age of your home, consider having a professional inspect the subfloor to ensure it’s in good enough condition to lay new tile.