Get matched with top roofers in Sharon, MI

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

A spray foam roof costs an average of $6,000 to install, making it one of the most affordable flat roofing options available. Costs can increase if you have a complex roof design with many roof vents or have a roof that’s larger than average. While up-front costs are relatively low, keep in mind that ongoing maintenance and repairs tend to be more expensive than you’d see with other flat roof materials.

Roof blistering and hail damage are different in their physical appearance. Blistering, often caused by inadequate ventilation, low-quality material, and improper installation, looks like large, irregular bubbles popping out of your roof. Meanwhile, hail damage is usually circular or oval dents entering your roof and often follows the same path as the hail storm.

The most crucial roof-strengthening method is achievable by following proper construction methods and guidelines from the start. To strengthen an existing roof, framers and DIYers can add hurricane ties or straps to the structure, sister rafters and other framing or truss members, or install additional fasteners or adhesives where necessary.