"Comfenergy was very professional thorough from the in-person estimate thru installation. Even though we didnt have a full energy audit, they still go over your entire home and tell you what should and what needs to be done. Some of the little things we did ourselves, or had our handyman. Then Comfenergy did the big part, seal and insulate the attic. We still had late 80's insulation and never a sealing done. It ended up being over an 8 hour project. They were not the cheapest estimate, but definitely the most in-depth review and recommendations provided. The two man team that did the actual work were very professional, showed us the work as the progressed, and good clean up job after all was done."
"The Complete Home Solutions' crew that handled my attic's insulation project was informative, professional and timely. They explained their processes start to finish, answering all questions along the way. Even in the face of obstacles due to the nature of my unique attic, they overcame and completed the project on-time and to complete satisfaction, absolutely astounding job! A giant thank you to the crew; Brad, TJ, JB, Jeremy, Anthony, and Jason!"
"Home Genius Exterior just completed phenomenal work at my property!! Windows and insulation done. â Top notch service from the consultation, to the schedule work, the start of the tear down, the installing and the final clean up. Highly recommend this company for your home service. Thank you for the hard work and service!"
"This was the second time we hired ROI Construction LLC to work on our home and they did an excellent job both times. Originally our roof was replaced and ROI did a fantastic job, going above and beyond in making sure every detail was perfect. Recently we had the roof and skylights of an addition replaced. In both instances ROI charged less than the competitors and the workmanship was high grade. I highly recommend this company."
With over 30 years of experience in the construction industry, we are the experts you need to take care of your home. We handle everything from roofing to remodeling to painting to carpentry. We will treat your home as we would treat our own. Give PMC Home Improvement, LLC a call today, we look forward to working with you!
"We needed insulation applied only to the underside of the house at this time. The guy who came out to give an estimate was great. The guy that came out to do the spray job (I expected a team and got just one guy) was super nice. The spray foam would appear to be difficult to manage during application as some spots only have a skim of insulation while others seem to have 7 inches of it. The office..... trying to get any information from that office.... was a hassle way beyond my wildest nightmares. Getting the estimate took days, getting scheduled took days. They have only one person working to do all of the scheduling and she "is out of the office" during a whole heck of a lot of "our office hours are from...". Figuring out what I needed to know to pay online took pulling teeth. It was the best price I got and it will make a world of difference to that house structure and its moisture issues.... but good grief!"
"We had a great experience with Ridge. The salesperson was very clear about the insulation options at the outset. The removal of old insulation and installation of new was done in one day. We are very pleased."
"Person who visited was very polite and noted that what I purchased was likely not something that would meet my expectations. I wanted an energy audit, how my systems could be improved in home, lighting, heating, insulation and air conditioners. What I got was a list of things they could work on and the price to do that work. The work list in no way was considered an energy audit, rather it was a punch list of things I could do based on their visual inspection. I did not have a comparison of work and benefit/savings calculation. There was no checklist of inefficiencies and how that translated into energy losses. For example, multiple hi hat lights in house, they spoke about boxing and insulating a few, less than 10, when I have almost 90 in house. Overall I was disappointed, the tech who came said the offering needed to be better presented prior to start of work."
The tool you use to sand plaster will depend on the size of the project. If you’re just working on a small section of your wall to get rid of an uneven spot on the surface, hand-sanding might work. However, for larger projects, a drywall sander can make a huge difference when it comes to both time and elbow grease—and an orbital sander can help for detailed areas such as around ceiling fans.
Yes, you can speed up the time it takes for plaster to dry, but it's important to do so carefully to avoid issues like cracking or crumbling. Proper ventilation is key; open a window or use a fan to circulate air in the room. Heat can also accelerate drying, but be cautious, as too much heat can cause the plaster to dry too quickly and crack. Check the plaster's packaging for the recommended drying temperature and set the room's thermostat accordingly. While managing humidity is important, avoid using a dehumidifier, which can remove moisture too aggressively and result in crumbly plaster.
If the holes in the plaster are small, you can fill them with layers of patching plaster until they’re filled. After it dries, you can sand the plaster and paint over it. If the hole is much larger, consider using bonding plaster first and then a layer of patching plaster, completing the process with sanding and a layer of paint.
Furring strips, thin strips of wood or metal, are not always required for ceiling drywall installation. If the ceiling surface is even and in good condition, drywall can be directly attached to the ceiling joists using screws. However, furring strips become essential when dealing with irregular surfaces or when additional insulation or soundproofing is needed. They create a level substrate for attaching the drywall. Ultimately, the decision to use furring strips depends on the condition of the existing ceiling and the specific requirements of the project.
Applying plaster to a wall will usually cost between $2 and $10per square foot for both the material and labor. The cost will vary based on the quality of the plaster you’re using and whether or not prep work is required before the work begins. Wall prep can add up to about 10% to your total costs. Plastering exterior walls can be more expensive in many cases because they are taller and require scaffolding and safety equipment.
The Saint Charles, MD homeowners’ guide to drywall insulation services
From average costs to expert advice, get all the answers you need to get your job done.
New insulation makes your home more comfortable and boosts energy efficiency. Use this guide to budget for insulation installation costs in Washington, D.C.
Find out the average basement remodel cost in Washington, DC. Learn what you can expect to pay for local basement finishing and plan your budget today.
Installing drywall is the most common way to finish your home’s interior. Use this drywall installation cost guide to see what your project is likely to cost in Washington, D.C.
Learning how to insulate plaster walls can help improve your home's energy efficiency. However, there are crucial cautions to consider before attempting.
Thick gaps and extra joint compound can alter the look of drywall. So, should drywall be butt up against a wall? Review this guide for seamless installation.
Insulating your walls requires the right insulation and installation method. Keep reading to learn how to insulate a wall without removing the drywall.
