Get matched with top plaster repair specialists in Cullen, LA

The tool you use to sand plaster will depend on the size of the project. If you’re just working on a small section of your wall to get rid of an uneven spot on the surface, hand-sanding might work. However, for larger projects, a drywall sander can make a huge difference when it comes to both time and elbow grease—and an orbital sander can help for detailed areas such as around ceiling fans.

Yes, to some extent, you can speed up the time it takes plaster to dry and cure. Choose a time of year when humidity levels are somewhere in the middle, neither too high nor too low, to allow moisture to evaporate from the plaster effectively. Also, open a window or set up a fan in the room to improve ventilation.

Don't use a dehumidifier in an attempt to speed up drying time, as a dehumidifier may suck moisture from the air too quickly, leading to crumbly plaster.

Look for flaking paint or air bubbles that burst and then flake away. Paint will begin to flake after being exposed to minimal moisture or water, so it’s a good indicator of any water damage. If you notice your paint starting to flake, feel the plaster underneath to see if it is soft or damp.

If your home was built before the 1940s and was not remodeled in the past 50 or so years, you probably have plaster walls. Aside from assuming, there are some practical ways to tell if you have plaster walls, including the following: If you knock on the wall and it feels solid, not hollow, if you can’t insert a thumbtack easily, if there are cracks that look like spiderwebs, or if your home has curved, arched, or swirled walls, doorways, or window openings.

If you have an unfinished basement or attic, you could examine the backs of any finished walls to check, too.