Get matched with top electricians in Sturgis, KY

Yes, but our analogy with the water hose doesn’t really work here. You see, electrical flow isn’t constant: It ebbs and flows like waves, coming in pulses of power. Hertz measures the rate of change in the flow of electricity, or how often it ebbs and flows. For example, 60Hz means that the electrons pulse through wiring 60 times per second. When they are pulsing, they’re in a brief retreat. Almost all United States equipment is rated for 60Hz.

Most standard residential water heaters, which are typically around 40 gallons and use 240 volts and between 3,500 and 5,500 watts, require a 30-amp, two-pole circuit breaker. For smaller, point-of-use water heaters using 120 volts and between 1,500 and 3,000 watts, a 30-amp breaker is also often adequate. However, some models may have different needs; units that use more watts than average may require a 40-amp breaker, while smaller units might only need a 20-amp breaker. Newer, tankless, or more energy-efficient models can also require a higher amperage. Having the correct breaker size is crucial for safe and efficient operation, so it's best to consult a licensed electrician to determine the specific needs of your water heater.

You can certainly talk with electricians about pricing, but the pro has the first and last word on what they charge. If you feel like a quote is too expensive, you can discuss the quotes that other electricians have made and see if they’ll lower their estimate in return. Or you may be able to talk about specific parts of the estimate and how they can be changed. 

You can identify Federal Pacific Stab-Lok® breakers by the label on the front of the panel that says “Federal Pacific” or “FPE” and the breaker itself should say “Stab-Lok®” either on the face of the panel or a label inside the panel door. The Stab-Lok® breakers are also usually red on the breaker switch.