Get matched with top electricians in Evarts, KY

A blinking, or twinkle, bulb makes Christmas lights blink. Usually, this type of bulb has a silver or red tip, making it easily distinguishable from other non-blinking bulbs. Most packages of Christmas lights come with additional blinking and non-blinking bulbs. Additional bulbs can be purchased at a hardware store or online retailer.

Using a wire stripper/cutter, strip about 1/2 inch to 1 inch of sheathing from electric wires, depending on the application. A self-adjusting wire stripper/cutter works best, but a standard wire stripper/cutter with holes for different gauges of wire works as well to cut and strip away the sheath without damaging the copper wire inside.

Before you start doing anything else, you must call your electric company to confirm their process. It is technically their meter that you’re moving, so there’s really no such thing as free rein. Moving the meter generally involves disconnecting power from the utility company, disconnecting the cables that run into your electrical panel, and dismounting the meter assembly. Once uninstalled, a handyperson will remount and reconnect the wiring in its new location.

You should not attempt to disable a smoke alarm unless you’ve already activated a replacement unit. To stop a hardwired smoke alarm from beeping, reset the device or silence the alarm. If you’re removing a hardwired alarm, shut off the power, turn the unit counterclockwise to remove it from the ceiling, and disconnect the wiring.