Get matched with top fireplace cleaning pros in Galena, KS

Knowing who to hire to install your fireplace is important when it comes to having a safe place to burn a fire in your home. The best person to contact for installing fireplaces is a mason or general contractor who has a National Fireplace Institute (NFI) specialist certification. If you’re installing wood paneling, then it’s a good idea to also find a pro who is Wood Energy Technology Transfer (WETT)-certified. 

Both of these certifications show that your pro is well-equipped to install fireplaces and inspect your home for the utmost safety.

If you want to avoid damaging your home's brick, you should always use a stain specifically formulated for masonry projects. These stains are designed to penetrate the porous surface of the brick and bond with it, unlike paints, which sit on the surface and are prone to peeling and flaking. Look for stains labeled for use on brick or other masonry surfaces. Avoid using regular paint on brick, as it will not adhere well and will likely lead to future maintenance issues. 

Yes, it’s a good idea to use paint primer on your brick fireplace before painting it. Brick is highly absorbent, so your first few coats of paint will likely seep into the surface of your fireplace, allowing the natural color of the brick to seep through. To avoid this, you’ll want to use one or two coats of primer, followed by the topcoat. 

Limewash and whitewash do not harm surfaces if you apply them correctly. Use on non-suitable surfaces can cause issues. For instance, applying limewash or whitewash to surfaces with existing sealants or incompatible materials may lead to poor adhesion or flaking. Also, harsh cleaning agents on limewashed or whitewashed surfaces can damage the finish. Proper preparation, application, and maintenance ensure that limewash and whitewash do not harm surfaces.