Get matched with top backsplash installation pros in Jonesboro, IN

As long as you follow the instructions on your peel-and-stick tile packaging, it should not damage your walls. A possible instance when you may accidentally damage your walls is if you install tiles improperly using additional adhesives that aren’t recommended.

Also, you can damage your walls if you’re not careful when removing tile. For example, you could accidentally make holes in the drywall with a paint scraper if you don’t heat the adhesive long enough before trying to pry it off.

To make a small bathroom look bigger, choose light-colored tiles in a medium- to large-format size. Lighter colors like white, cream, or light gray help open up a room, making it feel larger and more airy. While it may seem counterintuitive, small tiles can actually make a bathroom look smaller because the increased number of grout lines creates a busy pattern that visually shrinks the space. Instead, opt for medium- or large-format tiles for a more seamless, expansive appearance. For the best effect, pair your tiles with a matching or similarly colored grout to create a continuous surface that enhances the illusion of a larger area. Avoid dark colors, heavy patterns, and contrasting grout, as these can make the space feel more confined.

The tile spacing you should use will depend on the tile and where you’re installing it. Choosing the right tile spacers to maintain a consistent gap between your tiles is tricky. Generally, tile spacing shouldn’t be less than 2 millimeters on walls and 3 millimeters on floors because of stress relief requirements. Getting it wrong can result in uneven tiles and early repairs.

If the hearth ends against a wall, you can use a tile cutter as you normally would. However, if the edge of your hearth ends with no surface pressing against it,you may want to look into rounded tiles. These give a smooth edge to your hearth and make sure cut edges aren’t visible. You can also see if the tile you have has pieces that have been glazed or rounded on one edge. You’d then cut the tile and place it normally, with the cut edge facing inward.