Get matched with top siding pros in La Grange, IL

If you’re wondering how to make wood siding last longer, including Composite T1-11, inspect it annually or quarterly to spot and repair cracks, holes, or chipped areas. You’ll also want to re-stain the wood every 3 to 5  years or repaint every 7 to 10 years for protection (note that repainting requires stripping and sanding off old paint as well). Lastly, keep up with regular cleanings using a garden hose or low-pressure power washer to help prevent grime and discoloration.

Insulated vinyl siding costs about twice as much as the cheapest form of vinyl siding, but it’s still more affordable than other types of siding, including fiber cement, wood, stone, and brick. You get a lot of bang for your buck with vinyl siding; it’s durable, it’s available in a wide range of styles and colors, and it helps lower your energy bills.

You should plan to stain or refinish your home's cedar siding every three to seven years to maintain its appearance and provide maximum protection, though some estimates suggest a range of four to six years. The exact frequency depends on several factors, including your local climate, exposure to severe weather like direct sunlight, rain, and wind, the quality of the initial stain application, the type of stain used, and the overall condition and quality of the wood.

For homes in harsh climates with high humidity and significant sun exposure, you should plan on staining as often as every three years, while those in milder locations may only need to do so every seven years. For the longest-lasting protection in particularly harsh climates, consider using an opaque stain.

If you are looking for a lower-maintenance alternative, you might consider vinyl or aluminum siding. While the initial installation cost can be higher, they do not require as much upkeep and can offer more value over time, especially in areas with excessive rainfall or high humidity.

The recommended PSI (pounds per square inch) for cleaning vinyl siding can vary, so it's best to consult the manufacturer's guidelines. Generally, vinyl siding can handle high pressure, from 2,500 to 3,500 PSI. For comparison, more delicate materials like wood and aluminum siding should not face more than 1,500 PSI. To safely disperse the pressure on vinyl, use a tip with a wider spray span, such as a green (25-degree) or yellow (15-degree) nozzle. For routine cleaning of light dirt, a garden hose with a spray nozzle may be sufficient. Always exercise caution to avoid using excessive pressure that could damage the siding.