Get matched with top masons in Wallace, ID

Q: What stone is used for cobblestone?

• <div><p>Cobblestone can be made from many different types of stones but the most common ones, by far, are granite, basalt, limestone, and sandstone. If you are laying a <a href="https://www.angi.com/articles/brick-paver-patio-cost.htm">brick paver patio</a> or other such project, the medium is different. It&rsquo;s rare, but cobblestone can also be made from marble, slate, jasper, and other types of rock. Technically, you can make cobblestone from almost any type of rock, but if it is weather-resistant and stands the test of time is another question entirely. </p></div>

Q: Should I use mortar or concrete for a chimney crown?

• <div><p>You should use cement for a chimney crown. The purpose of the chimney crown is to protect the mortar below from water damage and the effects of weather. For this reason, chimney crowns should only be made using cement. When repairing a crown, use caulks and sealants designed for cement repair rather than mortar repair.</p></div>

Q: How much does it cost to install or replace brick or stone siding and what factors affect the price?

• <div><p>The cost to install or replace brick or stone siding generally ranges from $10 to $50 per square foot. The final price depends on several factors, including the specific material type, local labor rates, and any necessary preparation work, such as removing old siding. For example, different types of stone have varying costs per square foot: natural stone ($4.50&ndash;$35), stone veneer ($11&ndash;$13), faux stone ($6&ndash;$9), and cultured or manufactured stone ($5&ndash;$8).</p></div>

Q: Is it better to roll, spray, or brush paint on brick?

• <div><p>When painting brick, each application method has pros and cons. Spraying is much faster but may not penetrate the porous surface of the bricks. Rolling is effective for getting paint into the bricks but doesn't work as well on the mortar. Brushing is very time-consuming and also won't penetrate beyond the surface. For the best results, a combination of spraying and rolling is often recommended. If you use a roller, choose a thick option (at least a half-inch) and ensure the paint gets into all the crevices for even coverage.</p></div>

Q: Do I need to soak the brick before cutting it?

• <div><p>No, you don&rsquo;t need to soak the brick before cutting it by hand. In fact, cutting a wet brick can make it harder to see your score lines and may cause the chisel to slip. Soaking is sometimes used with power tools to reduce dust, but for hand-cutting, it&rsquo;s best to work with dry bricks for better control and visibility.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your masonry work project in Wallace, ID?

Select your specific project to find the pro for you.

Verified Reviews for Masonry Work pros in Wallace, ID

*The Angi rating for Masonry Work companies in Wallace, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Masonry Work needs.

*The HomeAdvisor rating for Masonry Work companies in Wallace, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Masonry Work needs.

Last update on October 22, 2024

Reviewed in October 2024
Reuben is spot on! He cleaned the windows inside and out. In addition to that he cleaned the screens and the hurricane shutters. He has been cleaning the above for several years now and is always pleasant and professional. I have recommended him many times.
Warner Building Services
Request a quote
Reviewed in April 2024
On time, good work. My dining room chandelier lights up beautifully since EON did the job.
EON ELECTRIC
Request a quote
Reviewed in March 2024
Very friendly and efficient! Quick and honest work! Definitely recommend especially for the price!
Crystal Clear Exterior Solutions
Request a quote
Reviewed in September 2023
Philip is a top notch business owner. He resloped/leveled my backyard for a new lawn. Great communication, quick, very knowledgeable. 10/10 will hire again.
Siri Development
Request a quote
Reviewed in April 2023
Travis and his crew were hassel free and easy to work with. He was very clear with costs of labor and materials and in my opinion the work performed was done at a reasonable rate. They listened to our concerns and made sure everything we discussed was done efficiently. I would rehire them again...
TAD Construction LLC
Request a quote
Reviewed in December 2022
He was honest, professional, and friendly. He did a fantastic job. I would use him again for my roofing needs.
Chad's Property Maintenance
Request a quote
Reviewed in February 2022
Really meticulous, he gives a fair price and does a great job.
Idaho North Excavation
Request a quote
Reviewed in November 2021
Michael Testa was WONDERFUL & very informative! He needs a raise!!!
DaBella - Spokane
Request a quote
Reviewed in June 2018
They did a good job in a timely manner.
Swift Glass
Request a quote

Find Masons in Wallace

Northwest Concrete Cutting

4.8(

)

Serving Wallace, ID and surrounding areas

Approved

In business since 1983

Free estimates

Emergency services offered

"A different contractor was much more prompt in responding to my Angie's list request, so I went with them instead of this contractor. No site visit was volunteered, but this was a pretty small project for them. Nice phone presence.
"

Response time1 day

4 neighbors recently requested a quote

Recommended by96%of homeowners

Serving Wallace, ID and surrounding areas

Approved

In business since 2021

Free estimates

Emergency services offered

"We’ve had a lot of crews in our home for various projects over the years, and I have to say this was one of the most courteous. They worked hard, navigating through our kitchen to access the basement and I really appreciated their efforts. Thank you MTU, we now have safe walls in our cellar and fresh beams to keep the house standing ;)"

Piers under an existing homes middle wall

Response time1 day

Response rate98%

21 neighbors recently requested a quote

Request Quote

Premier Basement Systems, Inc.

3.7(

)

Serving Wallace, ID and surrounding areas

Approved

In business since 1992

Free estimates

Warranties offered

"Outstanding experience. They figured out the problem and fixed it. Fair, honest, reliable, did good quality work. Great price. Responsive to all communication. Really nice guys, too. Wouldn't hesitate to hire them again."

Response time2 days

23 neighbors recently requested a quote

Recommended by84%of homeowners

Serving Wallace, ID and surrounding areas

Approved

In business since 2021

Free estimates

"Zach did an excellent job for me. I would definitely use him again."

+13

Response time7 hrs

Response rate100%

1 neighbors recently requested a quote

Request Quote

Foundation and Crawl Space Repair of Idaho

4.1(

)

Serving Wallace, ID and surrounding areas

Approved

In business since 1990

Free estimates

Warranties offered

"On time and no problems"

Response time1 day

Response rate99%

16 neighbors recently requested a quote

Serving Wallace, ID and surrounding areas

In business since 2020

Free estimates

Warranties offered

"I had some major cracks in the walls of my basement. They were very professional and made sure I understood what they were doing. Super hard working guys and awesome customer service."

Response time10 hrs

Response rate91%

Recommended by94%of homeowners

Request Quote

Circumference Concrete llc

5.0(

)

Serving Wallace, ID and surrounding areas

In business since 2020

Free estimates

Emergency services offered

"Very happy with the finished product, which was all custom work with upgrades throughout the project. Looking forward to this years project."

+15

Recommended by100%of homeowners

Request Quote

Chaud Company Plumbing Services LLC

4.7(

)

Serving Wallace, ID and surrounding areas

In business since 1986

Credit card accepted

"Showed up before I was off of the phone.
Diagnosed the problem and solved it before a tear fell from my
face about having to call a plumber on a Monday!
"

Recommended by96%of homeowners

Request Quote

Solid Finish Concrete LLC

5.0(

)

Serving Wallace, ID and surrounding areas

In business since 2025

Free estimates

Credit card accepted

"Laid down concrete very well, good finisher, driveway looked very well done when finished"

Response time11 hrs

Request Quote

North Idaho Cleaning Service

5.0(

)

Serving Wallace, ID and surrounding areas

In business since 2008

Free estimates

Emergency services offered

"Attention to detail, extensive knowledge and experienced. Had a great attitude. Very satisfied with work done, and in a timely manner. Would definitely hire again."

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 22

Masonry questions, answered by experts

Cobblestone can be made from many different types of stones but the most common ones, by far, are granite, basalt, limestone, and sandstone. If you are laying a brick paver patio or other such project, the medium is different. It’s rare, but cobblestone can also be made from marble, slate, jasper, and other types of rock. Technically, you can make cobblestone from almost any type of rock, but if it is weather-resistant and stands the test of time is another question entirely.

You should use cement for a chimney crown. The purpose of the chimney crown is to protect the mortar below from water damage and the effects of weather. For this reason, chimney crowns should only be made using cement. When repairing a crown, use caulks and sealants designed for cement repair rather than mortar repair.

The cost to install or replace brick or stone siding generally ranges from $10 to $50 per square foot. The final price depends on several factors, including the specific material type, local labor rates, and any necessary preparation work, such as removing old siding. For example, different types of stone have varying costs per square foot: natural stone ($4.50–$35), stone veneer ($11–$13), faux stone ($6–$9), and cultured or manufactured stone ($5–$8).

When painting brick, each application method has pros and cons. Spraying is much faster but may not penetrate the porous surface of the bricks. Rolling is effective for getting paint into the bricks but doesn't work as well on the mortar. Brushing is very time-consuming and also won't penetrate beyond the surface. For the best results, a combination of spraying and rolling is often recommended. If you use a roller, choose a thick option (at least a half-inch) and ensure the paint gets into all the crevices for even coverage.

No, you don’t need to soak the brick before cutting it by hand. In fact, cutting a wet brick can make it harder to see your score lines and may cause the chisel to slip. Soaking is sometimes used with power tools to reduce dust, but for hand-cutting, it’s best to work with dry bricks for better control and visibility.

The Wallace, ID homeowners’ guide to masonry services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Rachel Hoffman
•
May 30, 2026May 30, 2026
How Much Does Repointing Brick Cost? [2026 Data]
Need to repoint brick in your home to make your home look fresh and new? Use this guide to repointing brick cost to price out your project before starting.
Deane Biermeier
•
May 30, 2026May 30, 2026
How Much Does Brick Wall Repair Cost? [2026 Data]
This guide features information on the costs to repair a brick wall, whether or not you need a brick mason to complete spalling, tuckpointing, or a full restoration.
Timothy Moore
•
Apr 4, 2026Apr 4, 2026
How Much Does Door or Window Lintel Replacement Cost? [2026 Data]
Door or window lintel replacement costs $400 on average, but there are ways you can save. On the other hand, complicated work will increase costs considerably.
Chelsea Van Bloom
•
Apr 10, 2026Apr 10, 2026
Historic Brick Masonry Restoration Guide
If you own a historic brick home, you’ll want to pay attention to cracks, moisture, and settling—and greenlight a historic masonry restoration if they arise.
Kate Fann
•
Apr 10, 2026Apr 10, 2026
What is a Keystone in Masonry?
Keystone is a structural concept that dates back thousands of years. But what is a keystone in masonry, and how is it used today?
Kate Fann
•
Mar 6, 2026Mar 6, 2026
Type N vs. Type S Mortar: How to Select the Right One
Picking the right mortar matters in masonry projects. Learn when to use Type N versus Type S and what makes each mix ideal for different masonry applications.