Get matched with top drywall pros in Kimberly, ID
Top-rated drywall pros.

Need a pro for your drywall service project in Kimberly, ID?

Select your specific project to find the pro for you.

Find Drywall pros in Kimberly

Avatar for Canyon Side Construction LLC
Canyon Side Construction LLC
4.3(
16
)

Serving Kimberly, ID and surrounding areas

Approved

In business since 2023

Credit card accepted

Offers commercial services

"The best contractor and crew we have ever had the pleasure to work with. Communication, workmanship, cleanliness was all A . Armando is truly a man of his word and we look forward to working with him on other projects in the future. I would recommend him & crew for all your construction needs and desires. Call today- you won’t regret it!"
Response time3 days
12 neighbors recently requested a quote
Recommended by25%of homeowners
...
Showing 1-10 of 73
Drywall questions, answered by experts

Wet-sanding and dry-sanding each have pros and cons. Dry-sanding is less messy, so it’s a good option if you’re trying to minimize dust (for example, if you’re sanding an occupied home or working with particularly dry or dusty drywall mud). However, dry-sanding is quicker because you don’t have to keep rinsing a sponge or wait for it to dry before painting.

Plastering lasts for around 15 to 20 years without needing repairs or maintenance in most cases, and with proper upkeep, plastering can last a lifetime—sometimes more than 100 years. Plaster repair costs between $1 and $3 per square foot, and you may need these services once every 15 to 20 years or so unless you have a harsh climate where humidity changes are a constant issue. You can also opt to skim-coat plaster for between $0.90 and $1.30 per square foot, which may serve you better in the long run.

Metal corners, often referred to as corner beads for square corners, are used on drywall installations to provide structural reinforcement to vulnerable outside corners. Their usage safeguards against chipping, denting, or other forms of damage, enhancing the overall durability of the wall. Metal corners also offer a precise and straight edge that facilitates sharp and clean lines, crucial for achieving a polished and professional finish.

The age of your home can clue you in to whether you have plaster or drywall ceilings. Homes built after the ‘70s are more likely to have drywall ceilings and walls, while older homes have plaster. You can also do the pushpin test: A pushpin will go into drywall, whereas it’s much harder to push one into a plaster wall. If you’re still unsure, ask a drywall professional to let you know which type of ceilings and walls you have.

While a normal moisture level for drywall is between 5% and 12%, replacement is recommended if you get consistent readings above 17%. At this level, the drywall is likely too compromised by extensive moisture damage to be considered safe. You can replace either the entire sheet or just the affected section. If you are unsure after a visual inspection, it is best to have a contractor or water restoration provider use a professional moisture meter to get an accurate reading.

The Kimberly, ID homeowners’ guide to drywall services

From average costs to expert advice, get all the answers you need to get your job done.