Get matched with top fencing pros in Gooding, ID

Do you need a permit to build a fence if you are simply replacing an existing fence? Whether you need a permit in this case depends on your local laws and regulations. Most municipalities consider a fence replacement project as being equal to building a new fence, so you likely will need a permit. Check with your local building inspection department or zoning department to see if you need a permit. If you hire a local fence contractor, this pro can take care of obtaining all permits for you.

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again. 

You shouldn’t try to touch the electric fence, as it will shock you. Typically, the shock is low enough to be uncomfortable to humans or animals that come into contact with the fence. But an electric fence with high voltage, or a faulty fence, could shock you and cause serious injuries when touched.

This depends mainly on how well the posts were installed and what type of wood was used to build the gate in the first place. Softwoods have a life expectancy of up to 15 years but can last slightly longer with regular maintenance and waterproofing treatments. By contrast, hardwoods can last up to 30 years with little care, so you may avoid costly replacements by spending a little more upfront.