Best concrete wall service pros near Cascade, ID

Brick walls are typically more expensive than concrete walls due to higher material and labor costs. Brick wall costs can range from $10 to $45 per square foot, plus $70 to $110 per hour for labor. Meanwhile, concrete block walls usually cost $10 to $20 per square foot, depending on the material type. Labor for concrete tends to be less intensive and costly. Ultimately, concrete is often the more affordable choice, especially for larger projects. 

Any bowing in a basement wall indicates a problem that needs to be addressed by a professional. If your basement wall bows more than 1 inch, it's time for an inspection. Generally, a wall can bow up to 30% of its thickness (around 2.5 inches for an 8-inch-thick wall) before it becomes an urgent situation. Bowing of 2 to 4 inches is more straightforward to fix than bowing of more than 4 inches, which will require significant repairs. If the bowing is more than 6 inches, the wall will likely need to be replaced. The sooner you address the problem, the easier and less expensive the repair will be.

In most cases, you will need a building permit for cement work on your property. You need a permit for any project that adds a permanent foundation on your property—which, in most cases, includes even a flat slab of concrete poured directly on the ground. Building permits for concrete projects usually cost between $100 and $500, although this can get higher for larger projects. You can always ask your cement company if a permit is necessary for your project, and the expert will typically pull the permit for you to save you time and energy.

It’s possible to pour concrete if the temperatures are expected to dip below freezing at night, but you need to take some special precautions before you do. Most importantly, you need to make sure your concrete won’t freeze, so the best thing to do is enclose the area and heat it. You should also make sure you’re using cold-weather concrete that’s designed for pouring in cold weather. Use accelerants to help speed up the curing process and avoid cold temperatures from resulting in weak concrete.