Get matched with top basement waterproofing pros in Arbon Valley, ID

The most cost-effective foundation repair is using masonry patches and sealants to seal foundation cracks and offer some support to prevent further damage. These methods are used to fix minor foundation cracks quickly. However, they’re not suitable as a long-term solution, and they only offer minimal stability. On average, masonry patches and sealants cost $500, but a sealant like an epoxy crack injection can total over $2,000. If you’re handy and only looking for a temporary solution until you contact a local foundation repair contractor for a more permanent one, you can save hundreds by DIYing this repair.

Yes, it is possible to over-dehumidify a house by removing too much moisture from the air. This can create an overly dry environment that negatively affects those with respiratory or skin issues, and may cause your skin, hair, and sinuses to feel dry. However, this is unlikely to happen with most modern dehumidifiers, as they are equipped with moisture sensors and adjustable settings. These features allow the unit to pause automatically when the desired humidity level is reached, preventing the air from becoming uncomfortably dry. In contrast, older or more basic dehumidifiers left running for too long could potentially over-dry the air. To avoid this, aim for a balance between removing excess moisture and maintaining a comfortable environment. You can often monitor your home's humidity levels using a modern thermostat for guidance.

Mold and other fungi love moisture, so the best way to prevent mold growth after water damage is to remove as much moisture as possible. First, find the source of the water or moisture, such as a leak or clogged gutters, and correct the problem. Next, remove standing water, vacuum up puddles with a shop vacuum, and run blower fans and dehumidifiers for 24 to 72 hours. Once you've removed all traces of moisture, disinfect the area using either vinegar or bleach to kill any remaining mold spores.

Generally, moisture barrier padding costs $0.75 to $1.50 per square foot, varying by brand and mix. That’s a lot more than standard padding, which runs $0.25 to $0.90 per square foot. The price difference between these two options might seem steep, but think of it as insurance against future carpet replacement costs and subfloor damage. If you have pets or kids, that extra investment in high-risk areas like your living room often pays off.