Best roofers near Hiram, GA

Re-roofing is the process of placing a layer of shingles over top of existing shingles, rather than pulling out those shingles and replacing them. Compared to a full roof replacement, re-roofing typically costs less and requires less labor and time. It's not an option for everyone, though. You may need a full roof replacement if your roof already has more than one layer of shingles. A full replacement may also be necessary if your roof has extensive damage.

While it’s technically possible to repoint a chimney without scaffolding, it’s not recommended, especially for taller chimneys. Scaffolding provides a stable platform that allows for safer and more precise work. Without it, you might find yourself in a risky situation, and the quality of the repointing could suffer.

Metal roofs have a reputation for being noisy, but with proper installation and adequate insulation, they are not significantly noisier than shingle roofs. The type of metal used can affect the sound level; for instance, steel roofs are typically noisier than slate or asphalt tiles but quieter than aluminum. While some people find the sound of rain on a metal roof pleasant, you can take steps to reduce the noise. Installing a thicker underlayment, adding insulation between the roof and the house, or using acoustic tiles can effectively muffle the sound. The gauge (thickness) of the metal roofing can also contribute to sound dampening.

A roof's ability to handle snow depends on its strength and the snow's weight, as wet snow is much heavier than dry, fluffy snow. While designs in snowy regions often allow for 35 to 50 pounds per square foot, a general guideline is that a typical roof can withstand about four feet of fresh snow, two feet of packed snow, or just one inch of ice. Factors like the roof's age, slope, and support structure also affect its capacity; newer, sloped roofs generally hold more weight than older, flat ones. Ice and ice dams add significant, dangerous weight. Because capacity varies, it is best to contact a professional roofing contractor or the original builder to determine the maximum snow load for your specific home.