Get matched with top fencing pros in Arlington, GA

Regular maintenance for wire fencing includes annual inspections for rust or damage, tension adjustments every two to three years, and immediate repair of any breaks or loose sections. You should also regularly check the fence posts for stability, particularly after severe weather, and make sure to remove any vegetation growing along the fence line.

You can use pressure-treated wood for a horizontal fence, but you’ll need to purchase a thicker and higher-quality variety to ensure it doesn’t sag or warp after you install it. Use #2 pine grade lumber and boards and thicker dimensional lumber, such as a two-by-six. You’ll also need to use stainless steel or hot-dipped galvanized fasteners, as the chemicals in the treated lumber will cause regular galvanized fasteners to rust. 

Post depth for shadowbox fences should be at least two feet deep plus an additional foot for every foot of fence height above four feet. For a standard six-foot fence, this means a minimum depth of 3 feet. This depth helps to protect the structural integrity of your fence in the face of wind, soil movement, and seasonal ground shifts

Pallet fences come with built-in support through the fence posts you should install on each side of their vertical interior. Stand the fence upright and slide it onto the fence posts, then further support it with 2x4 wood boards that you drill across each point where two pallets connect side-by-side.