Get matched with top fencing pros in Whigham, GA

When it comes to materials, wire fences are the cheapest option. The average cost for a 150-foot wire fence is $1,350. The next cheapest material is chain-link, followed by wood.

As far as the style of fence, smaller, less private fences are cheaper than large, elaborate fences that block your whole yard. That’s why split-rail fences are the cheapest option for wooden fences. They cost roughly $10 to $30 per linear foot.

Corrugated metal is a strong, long-lasting material. A corrugated metal fence will typically last several decades, and the metal panels themselves may last for 40 to 60 years. The main thing you should be concerned about is the fence posts. Wood fence posts will last about five years if you purchase them untreated or about 15 years if you treat them after installation. Keep an eye on your posts and look out for insect damage and rot.

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

To maintain a chain link fence and extend its lifespan, perform routine checks and cleaning. This includes inspecting for rust, tightening any loose bolts or hardware, and removing debris buildup. These steps help preserve the fence's appearance and function.