Get matched with top ceiling fan pros in Westmorland, CA

The square footage of your room will dictate the correct ceiling fan blade size. For example: 

• Rooms smaller than 75 square feet require a fan that is 29 to 36 inches.

• Rooms up to 175 square feet require 42- to 48-inch fans.

• Rooms up to 350 square feet require 52- to 56-inch fans.

• Expansive spaces over 350 square feet need a fan larger than 60 inches.

If you’re replacing an old fixture with a ceiling fan, you usually won’t need a permit, but if your electrician runs new wiring for the fixture, you likely will need a permit. Building permits are necessary in most municipalities if you’re making changes to your electrical system, so even if you have partial wiring run to the area and need new wiring installed for added functionality, you’ll probably need a permit. Your electrician should be able to let you know if you need one, and they’ll typically file the paperwork for you.

Most installations take 3-6 hours, but complex electrical wiring or additional attic ventilation work may extend the timeframe.

If you’re removing a ceiling fan without visible screws, start by locating the fan canopy—a round cover placed above the fan blades and motor. There should be a thin ring that can be turned counterclockwise to remove the canopy and reveal the screws. After unscrewing the fan, you can disconnect the wires and remove the entire fan from the mounting hardware. For safety, make sure the fan switch is turned off before you remove the canopy. It may be easier to remove the fan blades first, too.