Get matched with top garage pros in West Point, CA

The ideal temperature for your garage in the winter is between 40 and 68 degrees Fahrenheit. Maintaining a minimum temperature of at least 40 to 50 degrees is crucial to prevent pipes, liquids, and other items from freezing. Low temperatures can also drain your car battery, so keeping the garage stable is vital for your vehicle. While the lower end of the range protects your belongings, the higher end is based on your personal preference for a comfortable space. If you struggle to keep the temperature from dropping below 40 degrees, consider installing a garage heater.

Indoor propane heaters are safe to use in a garage. You may be able to use an outdoor propane heater inside a garage in some instances, as long as the garage door remains open and there’s constant airflow to allow the carbon dioxide and carbon monoxide to escape. Other garage heaters include electric heaters and gas heaters.

If you open your garage manually, you don’t need sensors. If you have an automatic garage door opener, sensors are required by law. The federal law UL 325 mandates that all residential garage door openers in the U.S. must include sensors. Designed to prevent accidents and reduce the risk of entrapment, the sensors should be able to reverse the motion of the garage door within two seconds of detecting an obstruction. The sensors are there to keep you, your family, and your belongings safe from a door that might otherwise come down too hard or too fast.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.