"},"url":"https://www.angi.com/companylist/us/ca/chico/bob%27s-air-repair-reviews-6544906.htm"},"position":5},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"Neil Bennett","address":{"@type":"PostalAddress","addressRegion":"CA","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"David A."},"reviewBody":"Mr. Bennett gave an estimate, verified by his colleague only to change it when he saw the amount of work involved. He was two hours late to our home-I had to call him and he had forgottan. He then left his crew unsupervised, they disappeared with the excuse they had to stop and fill up their truck with gas. (Why didn't they do that before the job?)
They complained about what their boss paid them per hour. My wife and I did a lot of the work ourselves while they took calls from their angry boss and then took it out on us because they knew we were complaining. Very unprofessional.
His crew was ready to mutineer against him but took it out on us. I cannot recommend this person, not for large jobs. Maybe to haul an old broken barbecue to the landfill, but for anything that requires a truck full of items-forget it.
"},"url":"https://www.angi.com/companylist/us/ca/unknown/neil-bennett-reviews-7828138.htm"},"position":6},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"Gallaghers Plumbing, Heating & Air Inc.","address":{"@type":"PostalAddress","addressRegion":"CA","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Ryan M."},"reviewBody":"Keith came over for an estimate the previous Friday, took one look at our old tank water heater, and let us know what a liability it was. We were then persuaded to go with a tankless water heater -- I have to say that I wasn't hot on the idea initially due to cost recovery being nearly impossible on them due to high installation costs having to rejigger the plumbing, add electrical, and update the venting. However, we had decades of code violations which would have added up to a monstrous cost (especially for the vent) to replace with a normal water heater. The NPE-240A that we were persuaded to purchase uses PVC venting, which is routable through older metal vents -- thus is a cost reduction over installation of new, up-to-code metal venting. Note that Gallagher will have a promotional first-visit price. If you don't sign the dotted line to purchase a major service from them on that first visit, the price may increase by several hundred dollars on the next visit. That is a little bit of a pressure tactic and we would have done a bit more homework had we known of it. However, in this case, we had a potentially disastrous situation on our hands with that 23 year old water heater and didn't much feel like tempting fate by checking with other contractors for their costs and quality of service. After Keith left, I began to do some additional research. I came to find that flush valves are a huge convenience with tankless water heater. They allow you to easily isolate the house plumbing from the tankless water heater, connect two hoses to the heater and a pump, and circulate a lime scale dissolving solution (such as house-hold vinegar) to remove the scale from the heater exchanger. I was worried that the install wouldn't come with these flush valves. I called Gallagher at 9am on a Saturday morning and asked if they would be installing flush valves. The initial answer from the on-call plumber was no. Fortunately, Keith provided his personal/work cell phone. I called to verify the no answer. He assured me that the flush valves would be installed (and yes, they were -- and high quality valves too; single ball-valve, cast in Italy!). Thanks, Keith, for taking my call on your off day. That saved everyone a lot of grief :-) So my nerves were soothed and I waited patiently for Monday to get that old, possibly leaking, tank water heater out of my house. On Monday, two technicians came out on time (Travis and Chad). I don't recall which one was the experienced plumber, but one of them was definitely new and needed the experience (we all start from somewhere). Both set out to do their work and were fairly efficient. Only one mistake of note was caught. The lesser experienced technician did accidentally cut a hole through my gas furnace vent cap, believing it to be the water heater vent cap. The mistake was caught, and some sheet metal was cut and the cap was repaired with some mastic and water repellant stuff. I don't know if that's code but I suppose I'll find out when the code inspector visits to close the permit... certainly the last thing I need is CO entering the house because the cap was reinstall or repaired incorrectly. The copper pipes were completely reconfigured, and even shortened (which is always good for water pressure and heat retention). The PVC outlet vent was installed through the old vent and spray painted black. It can hardly be seen from the highway. The experienced plumber ensured that the system worked well at full firing. He didn't have a Manometer that worked with the unit, so we didn't get our gas pressure tested. He said that the inspector should be able to do that; should I have made him come back to test the pressure? Well, it seems to work with the gas stove going, but I haven't had a chance or a cool day to test the furnace plus the water heater and the oven. Backing up a bit, they did install an outlet into the water heater closet, tying into the bathroom electrical on the other side. The final result looked nice; the valves were mostly positioned in an accessible way. The hot water flush valve is a little hard to access with the gas trap in front of it. But everything got insulated, and a bit of PEX tubing was installed for the condensation line. That was also insulated, so UV degrading the PEX shouldn't be a problem? The heater was installed in an exterior water heating closet with a vented outside door. The condensation line was linked up with the A/C condensation line. The A/C condensation seems to still make it out. Bonus that the PVC was extended off my patio, but the condensation does now exit just behind the A/C unit. I've read that the Navien produces somewhat acidic condensation so I'm only slightly concerned that large amounts of condensation could cumulatively affect the A/C metal footings. We'll see what the inspector says (I'll update this review after that is completed). Overall, the experience was nice, and we were not bothered too much with the Gallagher membership plan like last time. The techs were personable and willing to explain what they were doing. They even let me see what a bad idea it is to have galvanized piping interact with copper piping. Yuck! It is nice to get rid of all those corroded galvanized stub outs between the old tank water heater and the main service to the house. They didn't mind that I was looking over their shoulders the entire time; personally, I hate when others do that to me, so good on them. The experienced plumber graciously repaired some of the busted out dry wall with some of my left over dry wall, which was great, and helped complete one of my DIY items. Only other thing that comes to mind is, ensure that the techs clean the cold water inlet filter after testing the tankless water heater. I had to do that myself (per the install instructions that came with the unit) and it had some debris from the performed work. The tech did explain how to clean that out as it is regular maintenance for tankless water heaters. He also let us know that there is an inlet air filter that is easily cleaned. Good experience overall; a few minor (?) issues cropped up. I'll update this review when the inspector checks on the work. The heater works great, even without a recirculation line. I'm much happier to be serviced by a tankless water heater!
** Update post-Inspections **
After waiting a few weeks, and inquiring Gallaghers about the permit, and then receiving it shortly after that inquiry, we had the City inspector over. He found that the tankless water heater did not have a properly sized gas input. He caught the fact that the gas line reduced down to 1/2" somewhere after the house furnace. For some reason the old water heater and adjacent stove had 3/4" pipe connected to that 1/2" pipe. The installers did not notice this as a potential problem. The inspector was concerned that if the house furnace were going, there wouldn't be much left over for the house tankless water heater. Thus he wrote up the install as needing 3/4" pipe all the way to the water heater. He also detected a hint of natural gas smell in the water heater closet. We pointed out that the house furnace roof jack had been damaged and repaired. The inspector took a look and wasn't so sure that the mastic would hold up to the vent's output heat. So the jack/bonnet would have to be replaced.
It took one night to get a plumber out to fix the gas leak. It took 3.5 weeks to get plumbers out here to fix the inspector's red tag items for upsizing the gas line and replacing the vent bonnet. We had called Gallaghers many times during those weeks and were told they would get the installers in touch with us to schedule repa"},"url":"https://www.angi.com/companylist/us/ca/los-molinos/gallaghers-plumbing%2C-heating-and-air-inc-reviews-4680306.htm"},"position":7},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"Gilmore's Appliance Repair","address":{"@type":"PostalAddress","addressRegion":"CA","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Richard B."},"reviewBody":"Gas oven in an older stove would not light. I described the problem in detail to the owner on the phone. He said the problem was mostly likely that the igniter was not producing enough amps to open the gas valve. He had an opening same day that I called. He showed up on time and fixed the problem in less than an hour. Good professional experience.
"},"url":"https://www.angi.com/companylist/us/ca/chico/gilmore%27s-appliance-repair-reviews-2019590.htm"},"position":8},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"All Pro Home Inspections","address":{"@type":"PostalAddress","addressRegion":"CA","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Olivia A."},"reviewBody":"Steve John of All Pro Home Inspections in San Diego, CA was simply outstanding. He was very upfront that although he charges more than the average home inspection, he would perform a very thorough inspection on behalf of the buyer and make sure the buyer knows exactly what they are getting themselves. We're not first time home buyers and too many times we went with whom the Realtors recommended and paid approximately $300-$400 for no more than a couple of hours of really just walking around. Steve John wanted both listing and buyer agents there along with me, the buyer, to make sure we see and hear everything first hand. The final report was just a deliverable for contract and negotiations purposes. He climbed the roof, poked around in the chimney and attic. He tested for moisture and the electrical. It's a 5 bedroom, 3 bath on 0.25 acre property in North County and he spent 6+ hours thoroughly investigating and documenting everything. The result, we found leaks in the roof, fault in the chimney and backyard gas lines to the fire pit and grill. Bottom line, we still wanted the house but negotiated over $8500 in closing credits. The return on investment was well worth it. Thank Steve for a professional inspection and consultation!"},"url":"https://www.angi.com/companylist/us/ca/san-diego/all-pro-home-inspections-reviews-140940.htm"},"position":9},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"BARNHART HEATING & AIR","address":{"@type":"PostalAddress","addressRegion":"CA","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Marva B."},"reviewBody":"I had somebody else come and check the gas heater. They said that they couldn't get parts for that anymore. They suggested I put in a whole new wall heater and it was going to be a few thousand bucks. I had somebody refer me to Barnhart Heating and Air and a guy from the company came out. He crawled under the crawlspace. He looked at it and said that he could fix it for $300 and he did it. It saved me a lot of money. He did a good job and I was thrilled. They have been an excellent reference for me for other people too. I would definitely use their services in the future too in a minute."},"url":"https://www.angi.com/companylist/us/ca/chico/barnhart-heating-and-air-reviews-4817505.htm"},"position":10}]}
Gas Log Service reviews from real Angi homeowners in Orland, CA
Last update on October 14, 2025
Lori E.
5.0
12/2023
Installed a gas fireplace to replace old wood burning stove. Plumbed the gas line to new fireplace. Great job!
Extremely Happy!! I live in Northern CA. I obtained 4 bids from local solar installers and 7 from the EnergySage website. I had done extensive research regarding the ratings for solar panels, inverters, monitoring, etc. SunLux was the first to respond from EnergySage. Their bid was an...
Gas oven in an older stove would not light. I described the problem in detail to the owner on the phone. He said the problem was mostly likely that the igniter was not producing enough amps to open the gas valve. He had an opening same day that I called. He showed up on time and fixed the...
Olivia A.
5.0
12/2011
Steve John of All Pro Home Inspections in San Diego, CA was simply outstanding. He was very upfront that although he charges more than the average home inspection, he would perform a very thorough inspection on behalf of the buyer and make sure the buyer knows exactly what they are getting...
Marva B.
5.0
08/2011
I had somebody else come and check the gas heater. They said that they couldn't get parts for that anymore. They suggested I put in a whole new wall heater and it was going to be a few thousand bucks. I had somebody refer me to Barnhart Heating and Air and a guy from the company came out. He...
For fast and friendly local plumbing and electrical service across the Northern Sacramento Valley (including Butte, Yuba, Sutter, Glenn & Tehama Counties) you'll be delighted with the great value and expert service you receive from Able Plumbing & Electrical. License #627760, BBB Accredited, Long Term Employees, Over 20 Years in Business. Additional DBA - Able Plumbing & Electrical.
For fast and friendly local plumbing and electrical service across the Northern Sacramento Valley (including Butte, Yuba, Sutter, Glenn & Tehama Counties) you'll be delighted with the great value and expert service you receive from Able Plumbing & Electrical. License #627760, BBB Accredited, Long Term Employees, Over 20 Years in Business. Additional DBA - Able Plumbing & Electrical.
At no charge we will come to your home and give you a free quote. If you like the way it looks, we can begin the work immediately. Otherwise, we charge you nothing. That sounds fair, doesn't it?
"Very professional and knowledgeable. Job was done on same day has estimate and fast."
Norma W on June 2024
At no charge we will come to your home and give you a free quote. If you like the way it looks, we can begin the work immediately. Otherwise, we charge you nothing. That sounds fair, doesn't it?
"Very professional and knowledgeable. Job was done on same day has estimate and fast."
Norma W on June 2024
FAQs for gas log service projects in Orland, CA
A gas log fireplace should be inspected and serviced as needed once a year. Preventative maintenance can help keep your fireplace in working condition and save money in the long run by avoiding more costly repairs on parts that could have been fixed sooner with a regular inspection.
The cost difference between a gas fireplace and a wood-burning fireplace depends on the type of wood-burning fireplace installed. The cost to install a gas fireplace tends to be cheaper than the cost to install a brick wood-burning fireplace. Installing a gas fireplace costs about $3,600 on average, whereas the cost to build a masonry wood-burning fireplace can go up to $30,000. The cost to install a wood-burning fireplace insert or stove can cost from $700 to $6,500, about the same as a gas fireplace on average.
The cost to repair a fireplace depends on the type, extent of repairs needed, and your location. The average cost to repair a fireplace varies depending on the part of the fireplace that needs work:
Firebox: $160–$2,500
Refractory panel: $200–$300
Hearth: $150–$800
Mantel: $500–$1,200
Pilot light: $100–$350
Igniter: $100–$150
Gas valve: $150–$300
Thermocouple: $75–$350
Thermopile: $75–$350
Yes, it can be worth installing a gas fireplace, depending on your home heating needs. The cost to install a gas fireplace can be much lower than the cost to install a comparable wood-burning fireplace. The convenience of starting a fire with the flip of a switch and turning it off just as quickly makes a gas fireplace a big time saver over starting and maintaining a wood-fueled fire. A gas fireplace also does not require ash cleanup or frequent chimney cleaning to remove creosote and other buildup that can lead to chimney fires. Gas fireplaces burn and heat much more cleanly than wood fireplaces.
A gas fireplace insert costs about $3,600 to install, on average. The cost to install a gas log insert ranges from about $700 to $6,500, depending on the size, type of insert, how it works, and heating needs. Gas fireplaces need electrical and gas lines installed properly, so hiring a pro is recommended rather than trying to DIY installation.
The homeowners guide to home care is here
From average costs to expert advice, get all the answers you need to get your job done.
Explore the most popular flooring material trends, including the classics and the newly popular materials that are designed for durability and longevity.
How much does a Saltillo tile floor cost? It depends on the size of your space, but on average, you’ll pay between $6 and $28 per square foot for this tile.