Get matched with top fire pit installation pros in La Puente, CA

It’s technically possible in some areas to install your own fire suppression system, but it’s usually not a good idea. Your system must conform to the fire code in your area and will need to pass a rigorous inspection before being activated and deemed safe. Installing a fire suppression system is a complicated job, and making mistakes as a DIYer is likely. Those mistakes can cause you to fail your inspection, which means you’ll have to spend more time fixing the issues or money to have a certified plumber do the work for you. It’s best to hire a professional.

You might be able to turn a normal door into a fire-rated door, but you’re better off purchasing one that meets all NFPA 80 standards. If you want to DIY a normal door into a fire door, you’ll need a self-adhesive intumescent seal, metal hinges, fire-resistant glazing, and a self-closing device, but you’re always better off buying a certified fire door.

Yes, dead palm tree fronds are a fire hazard. The leaves become highly combustible because the dead fronds don’t fall off the tree themselves, especially in hot, sunny climates. In fact, many wildfires start from dead palm fronds. Palm trees can also easily catch fire from lighting, electrical power lines, and fireworks. So, cutting off dead palm fronds before they become a fire hazard is important.

While your municipality may have its own regulations requiring pergolas or other structures to be a certain height above a fire pit, the standard recommendation is that the pergola should be at least 10 feet above the fire pit. A taller pergola allows the heat from the flames to dissipate before reaching the structure.