Best door pros near Hesperia, CA

You can use a variety of wood to build a barn door, but the most common options include 1-by boards and 2-by boards for the backing and the decorative boards on the front of the door. Softwoods like pine will save you some money and should hold up well, while hardwoods like maple and oak will stand up to more wear and tear. You could also build the backer out of plywood to minimize the cuts you need to make. Whatever you decide on, make sure the width of the wood is compatible with the mounting brackets you buy.

Security experts recommend deadbolt locks as the most secure option for a house's exterior or entry doors. Deadbolts provide the best security because they can prevent most types of forced entry and are harder to lockpick. Common types include the standard single-cylinder deadbolt, which is often found on front doors. For enhanced security, you can opt for a double-cylinder deadbolt, which requires a key to operate from both the inside and the outside.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

The difference between a mortise latch and a tubular latch is how they're mounted. A mortise latch has a single integrated lock body. One long rectangular space is cut into the door to contain it. A single keyhole is used to unlock both the dead bolt and latch from the outside. A tubular latch is a standard setup with a dead bolt separate from the regular spring bolt latch.