Top-rated drywall insulation pros.

Get matched with top drywall insulation pros in Applegate, CA

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Applegate, CA?

Select your specific project to find the pro for you.

TRUSTED BY APPLEGATE, CA HOMEOWNERS

  • Average homeowner rating star icon4.6
    Average homeowner rating
  • Verified reviews icon80
    Verified drywall insulation services reviews

Find Drywall insulation pros in Applegate

Avatar for The Insulation Pros
The Insulation Pros
4.8(
35
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Applegate, CA and surrounding areas

In business since 2013

Free estimates

Credit card accepted

"I had called Insulation Pros for an estimate with very short notice as well as two other companies. Conrad was the second person to give me a detailed estimate also was more then pleased to come out to my house and write me a real in hand quote. He was on time and very informative on the project. The following Monday the 2 professional men came to my house and did the job that I was promised and within the time that was allotted. Cleaned up and was off to the next shortly after seeing if I was pleased with the job. These guys are awesome. I do recommend Insulation Pros to anyone thinking about getting insulation done.
Thank you and all your staff.
Chris K."
Blown-In Insulation
Batt Insulation
Insulation Removal
Air Sealing
Thermostat Controlled Attic Fans

+2

Recommended by96%of homeowners
Avatar for Clear Efficiency Home Improvement
Clear Efficiency Home Improvement
5.0(
48
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Applegate, CA and surrounding areas

In business since 2019

Free estimates

Warranties offered

"It was fantastic! The company was very helpful when my construction was a little unusual. They found a great way to install my insulation!!the workmen worked tirelessly and I now have a very warm home. I highly recommend this company!!!"
You will never look at your home the same when you see what "Stack and Draft” is doing to waste energy.
Window Replacement
When you heat your home the hot air rises and begins to “Stack” pressure on the ceiling until it finds an escape route around the many holes hidden in the construction where walls and light fixtures meet the ceiling. The hot air leaking creates a draft by pulling in cold air from outside.
Window Replacement
The more you turn up your thermostat, the more "Stack" is applied to the ceiling, accelerating the icy cold "Draft" right behind it.

+75

10 neighbors recently requested a quote
Recommended by95%of homeowners
Avatar for Diamond Heating and Air
Diamond Heating and Air
4.8(
120
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Applegate, CA and surrounding areas

In business since 1990

Free estimates

Credit card accepted

"Diamond had an advertised inspection of house AC on Angies list.  So I bought the inspection through Angies thinking it was for the unit its self in the attic, but it was not it was for the condenser outside.  I contacted Diamond and asked to have the work done at that time I got a description of the actual advertised work.  I scheduled  the service anyway, but prior to Diamond showing up the drain in the celling plugged up and started to over flow into the catch pan that just happened to be rusted out.  As a result the water ran from the pan and started to leak through the celling.  I called Diamond back that they sent out a tech.  He unplugged the line and informed me the issue with the pan.  The tech stated that he would take the measurements for the pan and would turn it over to the office and they would contact me with the costs.  I called about the pan and they gave me the estimate on the pan and I had them schedule the work.  The tech returned later with a helper and replaced the pan as scheduled.  I then called back to set up a schedule for the original service which was done the following week.  I paid with my credit card not knowing the card number had been stolen, and I was buying stuff in China so I called Diamond and told them my issue with the card, and if it did not go through I would have to give them another card.  As it turned out the card was canceled prior to Diamond being paid, the person on the phone was very understanding, and helped work the issues.  Diamond personnel were very responsive, Professional on the phone, as well as completing  the service, and had a good understanding of the work that needed to be done and took the time to explain what was going on.  I would use them again.  (If you have a metal drain pan in your attic you might want to learn from my costly lessen and have it replaced with the newer type pan it might save you from having to replace the celling drywall and repaint.   Mine was right over the stair well going to the second floor so it turned out to be quite a job to clean up)
"
Additional Photos
Recommended by96%of homeowners
Avatar for Mega Power Electric, Inc
Mega Power Electric, Inc
5.0(
191
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Applegate, CA and surrounding areas

In business since 2000

Free estimates

Emergency services offered

Founded in 2000, for over 20 years Mega Power has been one of the premier solar companies in all of California, including many cities like Los Angeles, Riverside, Santa Clara, Granite Bay, Van Nuys, San Francisco, San Jose, Pasadena, Sacramento. Complete customer satisfaction, personalized approach and attention to details are our company’s intrinsic core values. We are providing the highest quality service as we enable our customers to save money, increase their property value and help improve the environment. Our team of certified professionals takes genuine pride in giving smooth, practical, Eco-friendly and positive solutions to our residential, commercial and industrial customers’ needs. All equipment and services meet both National Electrical Code requirements and local building codes. Mega Power offers a range of options toward green and energy-efficient solutions to all electrical power needs. We have extensive experience in building a complete solar panel system of all sizes on the roof or on the ground. Mega Power installs them with interconnection to the utility provider so that you could successfully sell excess electricity.

Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+32

Recommended by100%of homeowners
Avatar for Ray O Cook Heating & Air
Ray O Cook Heating & Air
4.7(
243
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Applegate, CA and surrounding areas

In business since 1947

Free estimates

Emergency services offered

"

Everything with this installation was flawless.  Willy and his team were punctual, professional and extremely knowledgeable.  We are thrilled with the work performed by Willy, Matt and another tech (sorry, do not have his name).  Paul was our contact with Ray O. Cook Heating and Air.  He gave us all the information we needed to make a decision and was quick to respond to questions we had.  Within one week we saw Jeremy on an emergency call (within 45 min.) had an estimate, and installation.  We would highly recommend this company.



"
Recommended by94%of homeowners
Avatar for Brazil Quality Construction Inc
Brazil Quality Construction Inc
4.7(
48
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Applegate, CA and surrounding areas

In business since 1997

Free estimates

Credit card accepted

"Outstanding quality, especially in custom designing what is called a cricket flashing to go around a chimney, the corner of the house and a valley which all converged at the same point.
Once the old roof was off, we found approximately $1700 worth of dry rot that needed to be replaced.  I felt the crew, particularly Mike Gibbs, did an excellent job of helping me understand the problems and then pick the best solutions to correct the problems.  Their price for the extra work was extremely fair and the again the quality was excellent.  We ended up replacing all of the fascia boards and the final result looked better than the original (and it was Mike's idea of how to do it).
In addition to the roof, they blew in some additional insulation in my two level attic to bring it up to an R-38 rating.  There were two spots that I felt might have been just a bit short and they returned promptly and filled in those spots by hand ... no questions asked.
For what it might be worth, the building inspector, when I told him the work was done by Brazil, sort of muttered under his breath "Good, they do it right" as he climbed the ladder to look at the roof.


"
Composition
Concrete
Integrated Solar
Recommended by100%of homeowners
Avatar for American Home Shield – Home Warranty
American Home Shield – Home Warranty
3.5(
5,688
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Applegate, CA and surrounding areas

In business since 1971

Credit card accepted

"Well, the first time the replacement was ordered it was the wrong one, which of course, delayed the installation a week. When it was finally installed I had to pay an additional $850 for code upgrades. This I was not informed of by Home Shield. Then we noticed that there was water on the garage floor and found that the pipe coming in from the wall was leaking at the wall so had to call the plumbing company back out to fix it. They first tried to say it was not their fault but since there wasn't a leak before they installed they did fix it. I have used Home Shield a few times before and never had a problem. Some of the companies they use are not the best so you have to research them before you commit. I have found HS service to be good if you do your homework. At the end of the day I was without hot water for almost 3 weeks but it was do to the plumbing company they sent out."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by65%of homeowners
Avatar for Green NRG Inc.
Green NRG Inc.
4.1(
62
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Applegate, CA and surrounding areas

In business since 1999

Emergency services offered

Credit card accepted

Since 2008 Green NRG Inc. servicing their customers with innovative and breakthrough energy and water solutions for homeowners and business owners that are looking for efficient and cost effective solutions to cut their energy and water costs. Green energy (NRG) is a leading solar company that is serving California since 2008 with an excellent reputation for providing high quality, reliable and affordable green power solutions and thousands of happy customers. Fully licensed & insured providing option to lease, or buy solar panels with $0 down.

Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+12

Recommended by90%of homeowners
Avatar for All Pest Pros
All Pest Pros
4.0(
105
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Applegate, CA and surrounding areas

In business since 2000

Free estimates

Credit card accepted

"It went rough, but we were both at fault. Had to say that first. But I am mostly satisfied. The outside sales person was on time for the walk through. He was nice and seemed knowledgeable. He had a lot of prior experience as a laborer before he became a sales rep. He was able to present his company and offer a quote on the spot. I agreed and gave him a deposit. Off we go. Right? Well, he based his quote on 700 square feet when it was actually 1100. That's why his price was low. You would think that I got a deal. But no. The labor crew only showed up with enough insulation for 700 SF. Not enough. So here is what we had to do. Introduce Jose. The lead man on the project. If it were not for him, it would have went south in a hurry. Turns out that Jose is a good person with a soul, and I am happy to "work with" a great person like Jose. APP is lucky to have him, and I hope they are taking good care of him. Just so you don't think I am fake, the "helper" that Jose had that day was worthless. Didn't want to work because he is a 20 year old kid who was out all night drinking and chasing girls (or boys), and was hung over. I did more 90% more work than he did (yes, I helped Jose. I have a good soul too). I let Jose vacuum out the old stuff, then I made him stop. He understood. Come back when you have 1100SF of insulation. Right? Before he took off, Jose up-sold me on insulating the bottom of my house (in between the floor joists under the sub floor)(under the house), applying a radiant barrier in the attic and switching from blown in cellulose with the pink panther batts. I ended up insulating under the house by myself. Nice. I communicated that to APP, but it got lost in translation. When the day arrived that Jose returned with 1100SF of material to finish the job, he showed up with two helpers. BTW, I had to request the APP office to please make sure Jose was who they sent to complete my job. Regardless of my implicit instructions that I subsequently made with the APP office, that I changed my mind and now want blown in cellulose again, and NO radiant barrier, Jose and crew still showed up with pink panther batts and radiant barrier. Whatever. The crew is there, lets get to work. The reason I only give them a B is because they installed the radian barrier wrong (in my opinion). I did research and radiant barrier should be one inch from the roof sheeting (plywood) if it's hot southern California. They stapled it to the 2x4 rafters so it's really 3-1/2 inches from the sheeting. Not sure if it is even radiating anything at this point. I think I just wasted a $1000. Even so, my neighbor asked me who did the job, and I ended up giving them the APP biz card, so I guess that was kind of a recommendation."
Image1
Image2
Image3
Recommended by83%of homeowners
Showing 1-10 of 16
Drywall Insulation questions, answered by experts

Although they are used for similar tasks, spackle and joint compound are not the same. Joint compound, also known as drywall mud, consists of limestone and gypsum and is primarily used for large-scale projects like taping and finishing seams on new drywall. Spackle is composed of gypsum and binding agents, making it a thicker compound best suited for small wall repairs like filling nail holes or cracks, as it dries quickly and is easy to sand. For small repairs, either product can be suitable. However, you can use joint compound for small jobs in place of spackle, but you cannot use spackle for large-scale taping and mudding projects.

Drywall mudding can be done in one day if the project is small and the desired effect isn’t too complex. If you need multiple layers of mud, one day may not be realistic. But a single room that requires little more than joint compound on the seams and screws can be done in a day or two.

The tool you use to sand plaster will depend on the size of the project. If you’re just working on a small section of your wall to get rid of an uneven spot on the surface, hand-sanding might work. However, for larger projects, a drywall sander can make a huge difference when it comes to both time and elbow grease—and an orbital sander can help for detailed areas such as around ceiling fans.

Plastering and skimming are two different techniques for finishing walls. Plastering involves applying a thick layer of a plaster mixture—typically containing gypsum, lime, cement, sand, and water—to create a new surface. This process often requires multiple coats and is used for repairing significant damage or creating decorative textures. Skimming, on the other hand, is a technique that involves applying a thin layer of drywall compound or joint compound over an existing surface to smooth it out, covering minor imperfections, small cracks, or uneven textures for a polished look. Plastering is generally more costly and labor-intensive than skimming. Although some people use the terms interchangeably, they refer to different processes and materials.

Yes, you can speed up the time it takes for plaster to dry, but it's important to do so carefully to avoid issues like cracking or crumbling. Proper ventilation is key; open a window or use a fan to circulate air in the room. Heat can also accelerate drying, but be cautious, as too much heat can cause the plaster to dry too quickly and crack. Check the plaster's packaging for the recommended drying temperature and set the room's thermostat accordingly. While managing humidity is important, avoid using a dehumidifier, which can remove moisture too aggressively and result in crumbly plaster.

The Applegate, CA homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.