Get matched with top toilet pros in Pardeeville, WI

The average cost to hire a plumber is typically between $45 and $200 per hour, with a common average rate around $125 per hour. This cost can vary based on your location, the plumber's experience, and the complexity of the job. Rates are often broken down by experience level: an apprentice may charge $45 to $90 an hour, a journeyman $60 to $110 an hour, and a master plumber $80 to $200 an hour. While hourly rates are standard, some plumbers may charge a flat fee for routine projects or offer project-based pricing. It's also common for plumbers to charge a minimum service or trip fee. For reference, some typical flat-rate costs for common jobs include: drain unclogging ($220), leaky faucet repair ($270), burst pipe repair ($400), toilet repair ($300), and water heater repair ($600). Note that these rates are for standard service hours; emergency, holiday, and after-hours calls will cost significantly more.

First, check that you have cut off the water supply to your toilet. This is a project that can only be done safely if running water cannot reach your toilet fixture. If you're seeing water trickle out after you've confirmed that the water supply is shut off, you can probably rest assured that what you're seeing isn't a problem. It's common for leftover water to spill out when you're removing your toilet's fill valve. If something goes wrong while you're working on your toilet, you'll need to look at your home's policy to see if your homeowner insurance covers water damage.

If you’ve accessed the bolts and nuts that hold your toilet seat in place and can’t unscrew them, it’s possible that they were overtightened or that the material corroded over time, making it impossible to unscrew. If that’s the case, you can either call in a plumber for help, or you can DIY a solution if you’re careful. Lay down masking tape around the mounting bracket and then use the tape as a surface to lay a hack saw blade. Move slowly to cut through the bracket and bolt, being careful not to damage the porcelain in the process.

Most toilets weigh between 50 and 100 pounds, depending on the material, size, and style. Some toilets can be disassembled into multiple pieces, which can make them easier to carry and dispose of. If you’re concerned that a toilet is too heavy to remove and lift on your own, enlist help or use a dolly to support the weight rather than carrying it yourself.